Hi Ben,

Thanks for your answer, there is indeed something different in the routing tables :


- With the IP alias :

Routing Table: IPv4
Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ---------- ---------
default              xx.121.24.254        UG        1        309
xx.121.24.0          xx.121.24.211        U         1         15 vfe0
xx.121.41.77         xx.121.41.77         UH        1          0 vfe0:1
224.0.0.0            xx.121.24.211        U         1          0 vfe0
127.0.0.1            127.0.0.1            UH        1          0 lo0

- With the zone :

Routing Table: IPv4
Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ---------- ---------
default              xx.121.24.254        UG        1        314
xx.121.24.0          xx.121.24.211        U         1         15 vfe0
224.0.0.0            xx.121.24.211        U         1          0 vfe0
127.0.0.1            127.0.0.1            UH        1          0 lo0

I tried a variety of route add commands to manually add the missing route once the zone is up, but with no success.

route add xx.121.41.77 -netmask 255.255.255.255 xx.121.41.77 -ifp vfe0:1
add net xx.121.41.77: gateway xx.121.41.77: Network is unreachable

Shall I try to add this route manually or is there another zone specific mechanism to use ?

Regards,
Alain


On Jun 3, 2008, at 11:45 PM, Ben Rockwood wrote:

Alain Durand wrote:
Now the IP address assigned to vfe0:1 cannot be ping'ed, using snoop
in the global zone I see the ICMP's coming but nothing being replied.

What am I missing ?


Have you looked at the routing tables in both of your test cases? This
sounds like a routing issue.

benr.
_______________________________________________
zones-discuss mailing list
zones-discuss@opensolaris.org

_______________________________________________
zones-discuss mailing list
zones-discuss@opensolaris.org

Reply via email to