On Tue, Feb 24, 2009 at 7:19 PM, Bangalore, Suresh
<suresh.bangal...@railcorp.nsw.gov.au> wrote:
> Hi Gurus
>
> I need to setup zones as shown below.
> Zone1: 10.10.10.X with default router 10.10.10.1
> Zone2: 10.10.20.X with default router 10.10.20.1
> And Global zone 10.10.30.X with default router 10.10.30.1
>
> Is this achievable. As shown above, I need the zones to have a separate
> default router than  the default router for the global zone.
>
> I don't have the luxury of using dedicated ports to achieve this.
> Any suggestions/workarounds are greatly appreciated.

What is the netmask?  That is, the story is completely different between:

10.10.10.x/16
10.10.20.x/16
10.10.30.x/16

And

10.10.10.x/24
10.10.20.x/24
10.10.30.x/24

If it is the second, then you are dealing with three distinct subnets
and life is much easier.   If you really only have one subnet, I'm not
sure there is a solution.

-- 
Mike Gerdts
http://mgerdts.blogspot.com/
_______________________________________________
zones-discuss mailing list
zones-discuss@opensolaris.org

Reply via email to