beno - wrote at 2006-7-28 08:01 -0700: >Right. My bad. However, that didn't work either :( The error was it couldn't >find 'var'.
I used "var" to indicate some variable. It was not meant that you use "var" literally... >So I tried 'item'. It couldn't find 'item'. So I tried this code: > > <td tal:define="number repeat/item/number" > tal:content="number">1</td> > > and it complained that it couldn't find 'number'. You must be very careful: both in reading and in writing. And you must try to understand how things work. And you must provide full error information (i.e. "Error Type", "Error Value" and the traceback -- you find all of them in the "error_log" object in your Zope "Root Folder"). If you use "repeat/variable" (again, "variable" is not meant literally, but *some* "variable"), then "variable" must be a repeat variable defined by an enclosing 'tal:repeat="variable ..."'. If this is the case, then "repeat/variable/number" should work. -- Dieter _______________________________________________ Zope maillist - Zope@zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )