http://bugzilla.kernel.org/show_bug.cgi?id=12015
Summary: Brightness (probably) doesn't supported on FS Amilo Pa 1538 Product: ACPI Version: 2.5 KernelVersion: 2.6.27 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Power-Video AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Latest working kernel version:none Earliest failing kernel version:all since 2.6.24 (earlier I doesn't tested) Distribution:Fedora 10 Hardware Environment: lspci: 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:00.0 VGA compatible controller: nVidia Corporation G72M [GeForce Go 7400] (rev a1) 07:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev c0) lsusb: Bus 001 Device 002: ID 0bf8:100f Fujitsu Siemens Computers Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 005: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Software Environment: Fedora 10 default install lsmod: video 28316 0 output 11264 1 video fuse 60992 2 cpufreq_ondemand 15504 1 powernow_k8 24836 1 freq_table 12928 2 cpufreq_ondemand,powernow_k8 nf_conntrack_netbios_ns 10880 0 nf_conntrack_ftp 16696 0 ip6t_REJECT 12160 2 nf_conntrack_ipv6 22984 11 ip6table_filter 11136 1 ip6_tables 26128 1 ip6table_filter ipv6 287272 18 ip6t_REJECT,nf_conntrack_ipv6 kqemu 175128 0 dm_multipath 23704 0 snd_hda_intel 476320 3 nvidia 7797520 28 snd_seq_dummy 11396 0 snd_seq_oss 39104 0 snd_seq_midi_event 14848 1 snd_seq_oss snd_seq 61968 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 15380 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 52224 0 snd_mixer_oss 23168 1 snd_pcm_oss snd_pcm 85512 2 snd_hda_intel,snd_pcm_oss snd_timer 30352 2 snd_seq,snd_pcm snd_page_alloc 16656 2 snd_hda_intel,snd_pcm snd_hwdep 16392 1 snd_hda_intel snd 68984 16 snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep firewire_ohci 30340 0 firewire_core 45504 1 firewire_ohci k8temp 13056 0 soundcore 14992 1 snd forcedeth 61840 0 hwmon 11064 1 k8temp crc_itu_t 10240 1 firewire_core serio_raw 14084 0 pcspkr 11008 0 i2c_nforce2 15624 0 i2c_core 29216 2 nvidia,i2c_nforce2 ac 13320 0 pata_amd 21252 0 battery 21000 0 ata_generic 14084 0 pata_acpi 13184 0 sata_nv 32392 2 sha256_generic 17536 0 cbc 12032 1 aes_x86_64 16384 2 dm_crypt 21128 1 ext4 216120 2 jbd2 75464 1 ext4 crc16 10240 1 ext4 Problem Description: Brightness doesn't work on FS Amilo Pa 1538. After load module "video" /proc/acpi/video is empty. I tested on latest Ubuntu and Gentoo, and it doesn't work too. Steps to reproduce: On FS Amilo Pa 1538 insert module video and go to /proc/acpi/video and enter "ls" command -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla