Hi

Perhaps I misunderstood you, but the Qlogic adapters are oem:ed by IBM, so
if you buy a IBM FC adapter, this is normally a Qlogic adapter.

And the FC attached 3584 uses SCSI address translation against WWN. We've
got this running today on AIX, and if you do a lsdev -C|grep rmt, you will
get the scsi addresses for each drive. Same with the library(/dev/smcX).
This should mean that the Qlogic adapter can handle SCSI >> WWN
translation.

Best Regards

Daniel Sparrman
-----------------------------------
Daniel Sparrman
Exist i Stockholm AB
Bergkällavägen 31D
192 79 SOLLENTUNA
Växel: 08 - 754 98 00
Mobil: 070 - 399 27 51


                                                                                       
    
                    "Loon, E.J.                                                        
    
                    van - SPLXM"         To:     [EMAIL PROTECTED]                  
    
                    <Eric-van.Loo        cc:                                           
    
                    [EMAIL PROTECTED]>           Subject:     Re: Sun Solaris and Qlogic 
QLA2202FS 
                    Sent by:             (Sbus) and 3590-EIA                           
    
                    "ADSM: Dist                                                        
    
                    Stor Manager"                                                      
    
                    <[EMAIL PROTECTED]                                                      
    
                    RIST.EDU>                                                          
    
                                                                                       
    
                                                                                       
    
                    2002-02-15                                                         
    
                    12:59                                                              
    
                    Please                                                             
    
                    respond to                                                         
    
                    "ADSM: Dist                                                        
    
                    Stor Manager"                                                      
    
                                                                                       
    
                                                                                       
    




Hi all!
I believe I heard about an issue with Qlogic adapters and SCSI address
assignments. For Qlogic adapters you cannot define fixed SCSI address
assignment (fixed relation between SCSI LUN's and FC World Wide Name). So
if
another FC device is added to the host, your SCSI assignments are messed
up.
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines


-----Original Message-----
From: Seay, Paul [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 15, 2002 02:41
To: [EMAIL PROTECTED]
Subject: Re: Sun Solaris and Qlogic QLA2202FS (Sbus) and 3590-EIA


We use the QLA2200F PCI card without any problems.  I cannot imagine why
there would be a problem with this.  I believe the same driver is used for
both.  The real issue is SBUS is going to be MUCH slower than the PCI card
(25mhz vs 66mhz).  Yes the IO slot board for PCI is about 10K and you may
not have room for it, but it is really worth the difference in performance
when you start running both FC disk and tape.

-----Original Message-----
From: Bruce Lowrie [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 14, 2002 2:09 PM
To: [EMAIL PROTECTED]
Subject: Sun Solaris and Qlogic QLA2202FS (Sbus) and 3590-EIA


All,
Bringing up a Sun Solaris E6000 as a TSM Server and would like to use
Qlogic's QLA2202FS Sbus Fibre Channel cards to connect to 3590-E1A.  IBM's
website only mentions support for QLA2200F (PCI). We can get Emulex LP8000S
cards but these are single port whereas the Qlogic cards are available in
dual port configurations. Has anyone out there been down this road?

Bruce E. Lowrie
Sr. Systems Analyst
Information Technology Services
Storage, Output, Legacy
*E-Mail: [EMAIL PROTECTED]
*Voice: (989) 496-6404
7 Fax: (989) 496-6437
*Post: 2200 W. Salzburg Rd.
*Post: Mail: CO2111
*Post: Midland, MI 48686-0994
This e-mail transmission and any files that accompany it may contain
sensitive information belonging to the sender. The information is intended
only for the use of the individual or entity named. If you are not the
intended recipient, you are hereby notified that any disclosure, copying,
distribution, or the taking of any action in reliance on the contents of
this information is strictly prohibited. Dow Corning's practice statement
for digitally signed messages may be found at
http://www.dowcorning.com/dcps. If you have received this e-mail
transmission in error, please immediately notify the Security Administrator
at <mailto:[EMAIL PROTECTED]>


________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
________________________________________________________________________


**********************************************************************
For information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain confidential
and privileged material intended for the addressee only. If you are not the
addressee, you are notified that no part of the e-mail or any attachment
may be disclosed, copied or distributed, and that any other action related
to this e-mail or attachment is strictly prohibited, and may be unlawful.
If you have received this e-mail by error, please notify the sender
immediately by return e-mail, and delete this message. Koninklijke
Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees
shall not be liable for the incorrect or incomplete transmission of this
e-mail or any attachments, nor responsible for any delay in receipt.
**********************************************************************


Reply via email to