You need to set DSMI_DIR and DSMI_CONFIG, I think.
The default locations are from ADSM 3.1, which is when the tool dates
from.
_____________________________
William Mansfield
Senior Consultant
Solution Technology, Inc
"Behdashti, Farshid" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
04/24/2002 09:35 AM
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject: Re: Piping a file to dsmc - ADSMPIPE
All,
Bill thank you for the information about adsmpipe.
I have downloaded this utility and compiled it after several tries.
Initially when I ran it, it failed since it could not find
'/usr/lpp/adsm/bin/dscameng.txt'. Now that the file has been created the
failure has changed:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
$ > tar -cvf - $HOME | ./bin/adsmpipe -c -v -f 'home_23apr02.tar' -l 300M
a /export/home/sp10k/ 0K
a /export/home/sp10k/.sh_history 1K
a /export/home/sp10k/.dbenv_sapcp00.csh 3K
***************************************************************
The ADSM API library is at a lower release than the application.
Proceed with caution.
***************************************************************
a /export/home/sp10k/.kshrc 7K
a /export/home/sp10k/.profile 4K
a /export/home/sp10k/.rhosts 1K
a /export/home/sp10k/.sp10k 2K
error in dsmInit. rcMsg=ANS0263E (RC2230) Either the dsm.sys file was not
found, or the Inclexcl file specifiedin dsm.sys was not found.
$ >
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Since, inclexcl file exists, I think it cannot find dsm.sys that is in
/usr/bin. I suspect that older ADSM releases may have used different
environment variable for finding configuration and libraries.
Does anyone know how to correct this problem?
Thanks for your help in advance,
Farshid
-----Original Message-----
From: Bill Mansfield [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 22, 2002 3:02 PM
To: [EMAIL PROTECTED]
Subject: Re: Piping a file to dsmc
You need adsmpipe. Look in ftp://www.redbooks.ibm.com/redbooks/SG244335/
Unsupported but works.
_____________________________
William Mansfield
Senior Consultant
Solution Technology, Inc
"Behdashti, Farshid" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
04/22/2002 09:27 AM
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject: Piping a file to dsmc
Hello,
We are using ADSM in the following environment:
ADSM server "Version 3, Release 7, Level 0.0" runs on Sun E6500 Solaris
5.7.
IBM tape library is 3494(robot) with 3590-B1A drives.
DSM client "Version 3, Release 7, Level 2.0" runs on many other Sun E10000
servers without any tape drives.
I need to do a full database reorganization on a database of about 450GB.
The export file(s) will be around 150GB which cannot be stored on disk.
I need to run the export and pipe or redirect the output to tape.
Is there a way to pipe a file to dsmc for backup - something like "cat
/etc/hosts | dsmc " to backup contents of /etc/hosts ?
Thanks,
Farshid Behdashti
