At Wed, 24 Sep 2003 10:36:45 +0100, Miguel Duarte wrote: > > Hi, > > Until now I wasn't able to make my remote work. > While posting in the EMU10K1 devel mailing list, someone said that it was necessary > to "initialize" the MIDI device used by the remote. A SysEx sequence has to be send > to '/dev/snd/midiC0D1'. The sequence is '0xf0, 0x00, 0x20,0x21, 0x61, 0x0, 0x00, > 0x00, 0x7f, 0x0, 0xf7'. oh, my...
> The source code bellow is of a program that does just that. After > modprobing the modules with the correct options (the options are the > same as the Platinum), just run this prog to "initialize" the midi > device. Voi-lá! The remote works! I think this is an ugly hack. i don't think it's so bad. >I'm sure that this can be implemented in the driver itself. yes, but why bother to do this in the driver, although you can do it nicely on user-space? (you can even use shell's echo command for this :) anyway, thanks for your info! Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
