Hi Clemens, Clemens Ladisch wrote: > Hartmut Geissbauer wrote: > > Clemens Ladisch wrote: > > > The problem is that the kernel automatically selects the first > > > configuration. Please try the patch below. > > > > drivers/usb/core/usb.c: usb_hotplug > > usb 1-2.4: configuration #1 chosen from 2 choices > > usb 1-2.4: registering 1-2.4:1.0 (config #1, interface 0) > > drivers/usb/core/usb.c: usb_hotplug > > snd-usb-audio 1-2.4:1.0: usb_probe_interface > > snd-usb-audio 1-2.4:1.0: usb_probe_interface - got id > > > > The device is not appearing in /proc/asound. > > Does the new configuration (the audio interfaces) show up in > /proc/bus/usb/devices?
No. > What happens when you re-load snd-usb-audio > after that? > 'rmmod snd-usb-audio' does not return to the command prompt. A 'modprobe snd-usb-audio' on another xterm after the rmmod as well. dmesg shows me: drivers/usb/core/usb.c: deregistering driver snd-usb-audio I tried to connect the device via a hub and direct. No difference. > > Regards, > Clemens > Thank you for your answer, Hartmut -- Hartmut Geissbauer <[EMAIL PROTECTED]> ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel