hiho, i encountered some problems after upgrading to kernel 2.6.19-rc4 vanilla from kernel org. sound from the soundcard is very crappy, scratches when basses are played, ect.
i didn't have this behaviour before and i noticed, that you made some changes
in sound/pic/hda/....
at least sound has been working nearly fine with kernel 2.6.18-rc5.
i just tested this again some mins ago to be safe on my side depending on
technical issues.
the 2.6.18-rc5 dmesg output when detecting the device is as follows
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [LAZA] -> GSI 5 (level, low) -> IRQ
5
PCI: Setting latency timer of device 0000:00:0e.1 to 64
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
ALSA device list:
#0: HDA NVidia at 0xfe020000 irq 5
according lspci --vvn output shows
00:0e.1 0403: 10de:0371 (rev a2)
Subsystem: 1043:81f6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 5
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] HyperTransport: MSI Mapping
2.6.19-rc4 output from dmesg
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AAZA] -> GSI 21 (level, low) ->
IRQ 21
PCI: Setting latency timer of device 0000:00:0e.1 to 64
hda_intel: No response from codec, disabling MSI...
hda_intel: azx_get_response timeout, switching to polling mode...
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
the lspci -vvn output
00:0e.1 0403: 10de:0371 (rev a2)
Subsystem: 1043:81f6
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 00000000fee0300c Data: 4191
Capabilities: [6c] HyperTransport: MSI Mapping
seems to be nearly the same except for the MSI adress&data and of course
irq pin B is routed to 21 instead of 5
any hints to get this working properly again?
also testing patches are welcome.
additional info, if i rmmod snd_hda_intel and afterwards try to modprobe it
again
my machine totally freezes, nothing is working anymore
i would appreciate your help.
best regards
marcel
pgpKTB2CXaPiR.pgp
Description: PGP signature
------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________ Alsa-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/alsa-user
