At Thu, 4 Sep 2014 02:58:59 -0400, Jackson Wiegman wrote: > > Trying to get a setup where I can control in software whether sound > goes out speakers or a connected headphone jack (which will always be > connected). > > The chip is a Realtek ALC262. Sound works fine on the speakers with no > HP connected, and works fine on the HP when connected. > > I've gone through alsamixer and disabled AutoMute to no effect. I've > used hdajackretask and hda-analyzer to change settings but no effect > either (other than being able to mute L/R channels or modify volume). > > I've loaded the latest drivers/packages from git and compiled with > debug, but I was unable to get any events coming through on the > tracer: http://pastebin.com/WxcsCc7r > > Here are alsa-info clips of pre-post heaphone insertion. > > Speakers: > http://www.alsa-project.org/db/?f=86e4be01cf8544089d449c370aaa70d3fcd24bb2 > > Headphone: > http://www.alsa-project.org/db/?f=7ce00bf2530ca13e374bf8a2620eaa57f2096795 > > I think I've exhausted my abilities for the moment. Any advice?
I guess the pins you've set up are fairly different from the actual I/O. For example, your headphone was mapped to "Line Out". Try to figure out the right pins via hda-jack-retask or else. Takashi ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
