On 2021-11-10 11:47 a.m., David Simpson wrote: > > Hi all, > > Just wanted to double check the use of /chg-robot/ which im using in > amanda.conf for an HP MSL3040 SAS tape library.… that this is indeed > the right type of /changer-driver/? (I have defined this stanza and > think it looks ok). > Correct, e.g.
define changer HP_G2 { tpchanger "chg-robot:/dev/LTOchanger" property "tape-device" "0=tape:/dev/nst0" property "use-slots" "1-7" property "load-poll" "13s poll 5s" device-property "LEOM" "TRUE" } > > The other question is around cleaning. Presumably when the library > itself alerts for cleaning, its up to the admin to fit it in around > the backup cycle. That’s the way im reading the docs at the moment for > this changer-driver. > > thanks > David > > > ------------- > > David Simpson - Senior Systems Engineer > > ARCCA, Redwood Building, > > King Edward VII Avenue, > > Cardiff, CF10 > 3NB > > > > > David Simpson - peiriannydd uwch systemau > > ARCCA, Adeilad Redwood, > > King Edward VII Avenue, > > Caerdydd, CF10 3NB > > >