On Mon, Apr 27, 2020 at 06:01:38PM -0400, Gene Heskett wrote: > On Wednesday 11 September 2002 12:50, Quinn, Richard C. - > > > >Yes, > > > >my box is a Sparc E-450 running Sol 6. > > > >I am using the SST driver for Solaris 6. > > > >I think it(SST Driver) is the predecessor to Solaris' sgen driver > > for Sol 7 and 8. > > > >Here are the boot messages for the Jukebox robotic arm and its 2 > > QUANTUM drives > > > >Sep 4 12:30:12 sun1 unix: sst3: found Changer device at > > tgt0, lun0 > >Sep 4 12:30:12 sun1 unix: sst3: Vendor/Product ID = STK > > 9730 Sep 4 12:30:12 sun1 unix: sst3 at pci1000,f7: > >Sep 4 12:30:12 sun1 unix: target 0 lun 0 > >Sep 4 12:30:12 sun1 unix: sst3 is /pci@1f,4000/scsi@4,1/sst@0,0 > > And try as I might, includeing hilighting the cmplete message, there > is something in the listing that prevents me from quoting it all. > > The bottom line is that for this, I think you are going to need the > manuals on this device. Its entirely possible it has a problem. I > find it different in that it finds the robot at address 0, and the > two drives at address 1 and 2. But properly set in amanda.conf and > chg-scsi.conf, I don't believe that to be a problem. > > You may have to either take it to a winderz box and check it with > their software, or return it to the vendor with your impression of > the problem.
Richard, I visited the StorageTek website yesterday hoping to see if they had online manuals. Seems that to get to the heard of the support pages you have to register and I was disinclined. However while reading some pages, and later visiting docs.sun.com searching for storagetek, some software was mentioned lots of times. I "think" the name was ACLCS, and it seemed to be the equivalent of mtx, something to control the jukebox. Solaris versions were mentioned. I may have gotten totally the wrong impression, if so sorry for the wild goose chase. But do you have, or know of the software? -- Jon H. LaBadie [EMAIL PROTECTED] JG Computing 4455 Province Line Road (609) 252-0159 Princeton, NJ 08540-4322 (609) 683-7220 (fax)