Dear Prakash, > I am new to forum. But early I used Angstrom on Beagle board. I > have an Thinclient working on Pollux ARM board. The board is not so > familiar and even the manufacture(from Korea) is not available now. > This Pollux board supports WinCE by default. But I would like to port > Angstrom on this board. Is it possible to port Angstrom on this board?. > If so, can you give some guidance on this like from where to start?. > > FYI, Pollux board specification is, ARM9263EJ CPU,3D graphics > accelerator, 64MB RAM, 64MB flash memory, VGA/LCD support,.etc.
I have OpenEmbedded support (machine config/kernel etc.) somewhere for the Pollux and MMSP2+ SoC's (and a few systems based on them like the MagicEyes reference boards and the GP2XWiz) but it may take me some time to find them on backups etc. as I have not used the boards in the last year or so :-o. You will need to get hold of a Linux kernel and U-Boot for the board, once you have that getting Angstrom running is pretty straight forward. In my humble view you really should start by getting Linux and the bootloader running on the board before you worry about a rich userspace like Angstrom. I am happy to provide a little help with this but my time is limited at the moment so it is more likely to be pointers then actual 'doing' help. Kind Regards, John Willis _______________________________________________ Angstrom-distro-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
