On 09/20/2010 05:00 PM, Almohanad Fayez wrote:
Hi, I'm running the Angstrom on the Beagleboard and I'm trying to find a way to modify the audio rate register values to force sampling rates other than 44.1 kHz and 48 kHz. Basically when I run "cat /sys/devices/platform/soc-audio/codec_reg" register 0x1 reads 0x91 which from the datasheet means the sampling rate = 44.1kHz. I'm trying to set register 0x1 to 0x81 to force it to run at 32 kHz. but the "echo 1 81> codec_reg" command is apparently not supported and from the angstrom the register is read-only I even tried chmod +w the register but that didn't work. I tried using debugfs to modify the register value unfortunately the functionality isn't available through that. I found a few listings online of ALSA patches that expose the register during debugfs, after copying and pasting them I still couldn't access the register. When I tried modifying the twl4030.c driver in the openembedded directory linux-omap-2.6.28/git/audio/soc/twl4030.c by basically hardcoding the reigster value to 0x81 it still didn't work. I'm running the 2.6.28. can anyone share some advice ???
You might try the Beagleboard list also. Philip
al fayez _______________________________________________ Angstrom-distro-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
_______________________________________________ Angstrom-distro-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
