I'm compiling u-boot-git very latest from this: http://www.gitorious.org/angstrom/openembedded/blobs/org.openembedded.dev/recipes/u-boot/u-boot_git.bb
It includes : http://www.gitorious.org/angstrom/openembedded/blobs/org.openembedded.dev/recipes/u-boot/u-boot-git/beagleboard/0025-Add-DSS-driver-for-OMAP3.patch and also http://www.gitorious.org/angstrom/openembedded/blobs/org.openembedded.dev/recipes/u-boot/u-boot-git/beagleboard/0026-Enable-DSS-driver-for-Beagle.patch It works on Touch Book, Beagleboard revision B5/C2 but not on Beagleboard-XM rev A2 (the one with the pin left up for DVI_PUP). I see 3.3V on the TFP410 on that corresponding pin so the TFP410 is on. Also, on Koen's demo image as of August 2010, I don't get any orange color during u-boot on XM-A2 but video shows up when Angstrom starts. Beagleboard rev C2 shows the orange color. So the problem seems limited to Beagleboard-XM and u-boot. - Has anyone ever seen the orange color on Beagleboard-XM for u-boot Beagleboard? - Any idea? Is there any specific registers for DM3730 compared to OMAP3530 that are not properly set up at u-boot (but got miraculously set up with Tomi's DSS2)? Especially due to the move of the first 6 video PINs? Grégoire _______________________________________________ Angstrom-distro-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
