ons, 13 02 2008 kl. 19:43 +0100, skrev Thomas Jensen: > Hi > > I have tried to install > Angstrom-minimalist-gpe-image-glibc-ipk-2007.12-h3900.rootfs.jffs2 > on my ipaq 3950. After copying the image to the ipaq, and I reboot, it > goes in black just after the bootloader load the image from flash. >
Now I have tried with a base image. Result is the same. This is output from my terminal: boot> load root partition root is a jffs2 partition: expecting .jffs2 or wince_image.gz. After receiving file, will automatically uncompress .gz images loading flash region root using ymodem ready for YMODEM transfer... A7198FE67E6D55563A289C193BAF3B5D Angstrom-base-image-glibc-ipk-2007.12-h3900.rootfs.jffs2 003BA058 bytes loaded to A0000400 programming flash...erasing ... Erasing sector 00040000 <snip> Erasing sector 01F80000 writing flash.. addr: 00040000 data: 20031985 <snip> addr: 003F0000 data: 20031985 verifying ... formatting ... done. boot> boot booting jffs2... booting boot/zImage from partition >root< Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds! build_list: max = 01F7FFBC . dir entries = 00000346 frag entries = 000008BD +4 increments = 00000000 +file_offset increments = 00000C3F loaded file of size = 0x0010E504 at location 0xA0008000 kernel partition base A0008000 kernel_magic=E1A00000 kernel_region_words[9]=016F2818 Linux ELF flash_imgstart=50040000 size=01F80000 dest=A0000000 offset=00008000 MMU Control=00000079 MMU PIDVAM=00000000 Skipping kernel copy by request. A0008000: E1A00000 A0008004: E1A00000 A0008008: E1A00000 A000800C: E1A00000 A0008010: E1A00000 A0008014: E1A00000 A0008018: E1A00000 A000801C: E1A00000 A0008020: EA000002 A0008024: 016F2818 root_filesystem_name=ramdisk Grabbed linuxargs, argc = 00000001 Using mach_type 000000CB setting boot parameters to noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttySA0 Making core tag at A0000100 Making cmdline tag at A0000114 Making mem32 tag at A00001D4 command line is: mtdparts=ipaq:[EMAIL PROTECTED](bootldr)ro,[EMAIL PROTECTED](root),[EMAIL PROTECTED](asset) noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttySA0 rootfstype=jffs2 Disabling LCD controller linuxEntryPoint=A0008000 Booting Linux image Uncompressing Linux......................................................................... done, booting the kernel. and no more happens. If I take the ipaq out of the cradle and reboot, it goes in black just after the bootloader starts Linux. What can be the reason? Is 3950 a bad model? I can see in the mail archive another user have had problems booting his 3950. Are other ipaqs easier/better/more supported? -- Thomas _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
