On Sat, Dec 20, 2008 at 11:55:30PM +0000, redsh...@pandora.be wrote: > Hello > > I'm testing out ATA-over-Ethernet, and I'm getting very poor > results. On the (only) client, I can't even get read speeds above 1 > megabyte per second: ... > ifconfig shows 0 errors, drops, overruns, frame or carrier errors, > on BOTH sides. Each side is connected using gigabit ethernet with > the MTU set to 1500. On the target side I'm using vblade: ... > The weird part is, I can't always reproduce this. When the stars are > right and I modprobe aoe, I get "normal" read speeds, which are about > 75% of what the actual disk is capable of. ... > What else can I look at?
One thing to look for would be a network link that is switching between gigabit and 10 Mbps. -- Ed Cashin <ecas...@coraid.com> ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Aoetools-discuss mailing list Aoetools-discuss@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/aoetools-discuss
