I have tried increasing it to about verbosity level 11. Even then no sign of digits coming in. My telrad technician also came in and checked everything and certified the telrad is sending the digits as he switched cable on the T1 card with another card (connected to Telco) and showed that the dialing out worked fine on the same card with the same settings. To give you an idea, we use 99 to pick up trunk from telco and dialout to pstn on telrad, and asterisk is configured to be picked up by dialing 88. so when we switched the cables we were able to make calls by dialing 88 validating that the card was configured fine and the digits are being sent out. Any thoughts do you think there could be something trivial that I have missed in the configuration on the asterisk side to let asterisk know that this T1 span can dial out (works) and also receive calls (does not work) ?
-----Original Message----- From: qrss [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 29, 2005 11:40 AM To: asterisk-users@lists.digium.com Cc: Karthik Natarajan Subject: Re: [Asterisk-Users] Problem with Connecting PBX to Asterisk >I would appreciate if someone can help me figure out what could be the >problem in receiving the digits from the telrad switch/pbx. When you dial from the telrad, do you see any information being generated on the asterisk CLI? You may have to increase verbosity of the console by starting with something like asterisk -vvvvvvr to see this. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
