Hi As a beginner of Asterisk server I still have some problems running CallerID on ordinary analog Swedish phones. I use a Digium card TDM400P with 1 FXO and 3 FXS adapter cards. The Asterisk version running is the lates 1.0.9. I have also a Vood I3Micro ATA adapter running SIP protocol towards Asterisk server. I can detect Swedish callerid from the FXO card, and the CallerID displays perfectly in phones connected to the SIP adapter and also to one of my Dect phones (philips) connected to the Digium card. The strange thing though is that the CallerID is presented after the first ring on the Phone connected to the Digium card. On swedish phones normally the CallerID is presentad before the first ring. The problem: I have one other Dect phone connected to Digiums Card(TDM400P), an Ericsson DT 260. The Ericsson phone only supports true swedish standard CallerID (DTMF signalling before the first ring), and CallerID does not work for this phone:(
I have measured the outgoing signal from the TDM400P card and I have confirmed thet NO DTMS signals is sent out. Is it possible to show swedish callerid on ordinary analog phones connected to the Digium card? If yes, can somebody see the problem in my configuration files? ---zaptel.conf fxoks=1 # Make sure that the FXS(green) module is closest to the bracket if fxoks=2 # FXS module fxoks=3 # FXS module fxsks=4 # FXO module defaultzone=se loadzone=se ---zapata.conf signalling=fxo_ks echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=yes echotraining=400 threewaycalling=yes transfer=yes cidstart=polarity usecallerid=yes cidsignalling=dtmf callerid=4000 group=1 context=outgoing mailbox=1 channel => 1 signalling=fxo_ks echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=yes echotraining=400 threewaycalling=yes transfer=yes usecallerid=yes cidsignalling=dtmf cidstart=polarity callerid=4001 group=1 context=outgoing mailbox=1 channel => 2 signalling=fxo_ks echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=yes echotraining=400 threewaycalling=yes transfer=yes immediate=no usecallerid=yes cidsignalling=dtmf cidstart=polarity callerid=4002 group=1 context=outgoing mailbox=1 channel => 3 ;---------------------------------------------------------------------------- signalling=fxs_ks echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=yes echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds immediate=no usecallerid=yes cidsignalling=dtmf ; Sweden cidstart=polarity ; Sweden callerid=asreceived useincomingcalleridonzaptransfer=yes group=2 context=incoming ; Points to the default context of your extensions.conf channel => 4 ; The number of your FXO module(s) cut end----------- In extensions.conf I use the syntax: Dial(Zap/1|40|Tt) on the dial command. Best Regards Josef Seger
<<attachment: winmail.dat>>
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users