Hi Eric, I did some work with the Fritz! card back in Feb / March this year. I used the mISDN drivers with chan_capi 0.3.5 and whilst it worked it wasn't particularly stable. Calls could be placed using chan_capi in PTP mode but incoming calls were not recognised in asterisk even though the mISDN driver seemed to be aware of the call (a capi debug showed the incoming call in PTP fine). I never used chan_mISDN myself although I did get an email from someone in Europe saying that he had successfully used the mISDN driver with chan_mISDN in PTP mode.
Things may be different now with the latest chan_capi as I believe it has undergone significant changes since 0.3.5, I don't really know much about the differences in features between chan_capi and chan_misdn. I no longer have a BRI or Fritz! card available to me for testing and currently focus purely on PRI's and Zaptel. Craig ----- Original Message ----- From: "Eric Bishop" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com>; <[EMAIL PROTECTED]> Sent: Wednesday, July 27, 2005 7:46 PM Subject: Re: [Asterisk-Users] Fritz PCI card in ptp mode with chan_misdn Craig, You obviously have has experience with chan_mISDN in AU and the Fritz. Have you tried chan_capi? I am currently using a Fritz with chan_capi in AU and am not entirely happy with it. Is chan_mISDN any better? On 7/27/05, Craig Guy <[EMAIL PROTECTED]> wrote: > The mISDN Fritz! driver supports PTP mode. In your startup script where you > load the mISDN drivers call the fritz driver thusly: > > modprobe avmfritz protocol=34 > > Bit 5 sets PTP mode, bits 3-0 set the D-channel protocol ID (set bit one for > DSS1). > > Craig > > ----- Original Message ----- > From: "Michiel van Baak" <[EMAIL PROTECTED]> > To: <asterisk-users@lists.digium.com> > Sent: Wednesday, July 27, 2005 12:35 AM > Subject: Re: [Asterisk-Users] Fritz PCI card in ptp mode with chan_misdn > > > > On 18:21, Mon 25 Jul 05, Johann Steinwendtner wrote: > > > Hello ! > > > > > > I would like to get working a Fritz PCI card using chan_misdn > > > operating in ptp mode. > > > > As far as I know the fritz cards do not support ptp mode. > > We tried all the possible config file options with chan_capi > > and in the end we trashed them and installed a junghanns > > QuadBRI. > > > > If you get it working in ptp mode, please tell me how you > > did it. > > -- > > Michiel van Baak > > http://michiel.vanbaak.info > > [EMAIL PROTECTED] > > GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x7E0B9A2D > > > > "Why is it drug addicts and computer afficionados are both called users?" > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users