Hi rootlinux,
I'm in Australia where we also uses crc4 on the span line, could you also
show the relevant section of your zapata.conf? Looking at your
extensions.conf excerpt, it is customary to group the b channels eg
Dial(Zap/g1/12345678) and there should be an entry in zapata.conf under your
channel definitions such as group=>1. Also check that your context in
zapata.conf matches the extensions.conf context you are trying to dial from.
Craig
----- Original Message -----
From: "root linux" <[EMAIL PROTECTED]>
To: <asterisk-users@lists.digium.com>
Sent: Monday, August 22, 2005 11:30 AM
Subject: [Asterisk-Users] Unable to create channel of type 'Zap'
My zaptel.conf config: -
# Below setting is for E1
span=1,1,0,cas,hdb3
bchan=1-15
bchan=17-31
dchan=16
loadzone = us
defaultzone=us
My zapata.conf config: -
# Below setting is for E1
switchtype = national
signalling = pri_cpe
group = 1
channel => 1-15
channel => 17-31
My extension.conf config: -
[default]
exten => 181,1,Dial(Zap/1/181)
When I perform a dailing from my SIP Phone, I got the
error message as below: -
-- Executing Dial("SIP/1183000001-6f4e",
"Zap/1/181") in new stack
Aug 22 11:03:02 NOTICE[9023]: app_dial.c:764
dial_exec: Unable to create channel of type 'Zap'
== Everyone is busy/congested at this time
I am beginner...How to solve this?
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
