Hi all, I've just updated to current CVS, and have 2 polycom IP phones, one is a IP600 and the other is a IP300. The IP600 shows the status of the IP300 and a ZAP line quite nicely, but the IP300 won't show the status of the IP600....
Is there any additional debug apart from "show hints" to see why this might not be working ?? -= Registered Asterisk Dial Plan Hints =- 655 : SIP/gs102_1 State 0 Watchers 0 605 : Zap/127 State 0 Watchers 3 604 : SIP/ata186_2 State 0 Watchers 0 603 : SIP/ata186_1 State 0 Watchers 0 602 : Zap/129 State 0 Watchers 0 601 : SIP/polycom_b State 0 Watchers 1 600 : SIP/polycom_a State 1 Watchers 2 The IP600 is watching 605 and 600 and working nicely for both, the IP300 is watching 601, but isn't working.... Has anyone got a IP300 phone to display the status ?? Any suggestions for things to look at/etc ?? PS, of course, the current state is that 600 is off-hook and all others are on-hook. Regards, Adam -- -- Adam Goryachev Website Managers Ph: +61 2 8304 0000 [EMAIL PROTECTED] Fax: +61 2 8304 0001 www.websitemanagers.com.au _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users