Hi! I got this answer from the digium support:
> >You may wish to use the attended transfer by either using hold or >flashhook instead of the # features.conf attended transfer option. >From >a phone connected via a Zap channel, you would need to hit flash. Then >enter the extension which you wish to transfer to. You can either >hangup once it begins ringing or wait until the remote end answers. >Once the remote ends answers you may announce the caller then hangup. >This method works better than the attended transfer option available in >the features.conf file. You must have your dial plan configured >properly to allow for transfers. Dial plan configuration also falls >under our Express Technical Support Service. > > >Regards, >Chris Hozian That means, that an attended transfer is possible as it would be liked in this mailing-list-thread. I tried to make call transfers with the flash button, but it doesnt work. "threewaycalling" and "transfer" is set to "yes" in my zapata.conf. But when I hit the flash-button - nothing happens. All incoming calls triggers a Dial() on all extensions with the Dial-Parameter "t" - so a call transfer should be possible. (Are here further configurations necesseary in my dialplan?) What am I doing wrong? Tom _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users