I had a similar problem, basically asterisk would be sending dialled
digits before the telco was ready to pick them up, in my case some
numbers would work but most wouldn't and i'd get messages from the telco
like you described, the solution I'm using: put a delay before dialing
the number:
from my extensions.conf:
PAUSE=w
[trunklocal]
exten => _NXXXXXX,1,Dial(${TRUNK}/${PAUSE}${EXTEN},${TIMEOUT},W)
exten => _NXXXXXX,2,Congestionsimilar for the long distance and international calls basically dial a "w" before sending the actual number. HTH On Thu, 2006-02-23 at 07:33 -0700, [EMAIL PROTECTED] wrote: > When a call is placed out the Zap interface there is a long pause followed > by an error message from the telco that the call can not be placed as > dialed. > > We have a tdm2413e with 11 1FB (POTS) lines. The number being dialed is a > working local number, all dialed numbers get the same error. > > What should we be looking for ? > > > Best regards, > > Duane Pudenz > Network Infrastructure Manager > Shasta Industries > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Regards, Gerard Saraber Network Admin, Rarcoa, Inc. (630) 654-2580 x11 [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
