Am Friday 24 February 2006 16:48 schrieb Anton Krall: > Any modification made to zapata as far as echo and gains? > > Should echocancel be on or off?
i have echocancel switched on, faxdetect is on, rx- and txgain is not used. (commented out). my var/log/messages says: Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules) ... Zaptel Version: 1.2.4 Echo Canceller: KB1 maybe it depends on different hardware revisions? i don't know... tom > > |-----Original Message----- > |From: [EMAIL PROTECTED] > |[mailto:[EMAIL PROTECTED] On Behalf Of > |Thomas Artner > |Sent: Friday, February 24, 2006 8:25 AM > |To: Asterisk Users Mailing List - Non-Commercial Discussion > |Subject: Re: [Asterisk-Users] fax receive using TDM400P > | > |Hi! > | > |I am using tdm400 cards for receiving faxes. It worked quite > |out of the box. I installed spandsp for the rxfax application only. > | > |I use it as phone/fax switch: > |All incoming calls are answered automatically to listen > |whether its a fax or not. If it is a fax, the call is > |forwarded to the buil-in fax extension, otherwise the analog > |phones (all on tdm400) rings. > | > |It works without problems. Its for a small company (about a > |few faxes per > |hour) > | > | > |Tom > | > |Am Freitag, 24. Februar 2006 07:10 schrieb Anton Krall: > |> Guys. > |> > |> Ive been testing how to receive faxes using TDM400P cards > | > |and so far, after > | > |> playing with gains, echocancell and echotraining on > | > |zapata.conf.. Ive ha > | > |> dno luck, faxes come in as garbage or broken or with blank lines. > |> > |> Anybody has successfully done this? Any tips.. Also I have > | > |some ideas: > |> 1. Is it really possible to get fxes on a fax machine using > | > |ATAs like the > | > |> sipura 2002? Even using ulaw and pass-thru, is it possible? > |> > |> 2. Since the faxes is coming from PSTN thru the card, I > | > |guess asterisk will > | > |> always stay in the middle right? No way around this. > |> > |> 3. Im also trying to receive faxes usign a TE110P card with spandsp, > |> unicall and E1 R2MFC, no luck also, some stuff, garbage and > | > |broken faxes. > | > |> Anybody done this sucessfuly? > |> > |> Hope anybody can share their thoughts and insight on this. > |> > |> _______________________________________________ > |> --Bandwidth and Colocation provided by Easynews.com -- > |> > |> Asterisk-Users mailing list > |> To UNSUBSCRIBE or update options visit: > |> http://lists.digium.com/mailman/listinfo/asterisk-users > | > |-- > |Thomas Artner > |_______________________________________________ > |--Bandwidth and Colocation provided by Easynews.com -- > | > |Asterisk-Users mailing list > |To UNSUBSCRIBE or update options visit: > | http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users