Hi David,
It can be set on the Sipura / Linksys devices. Look under Admin, Advanced,
Regional, Call Progress Tones. There is a link floating around on Whirlpool
forums to a page and auto provision file containing the correct settings to
produce Australian tones. It also depends on whether the phone allows the
PBX to make the progress tones or whether the phone alone does them. The
setting to control this is in Sipura/Linksys firmware 3.1.10 and higher from
memory. If you want the handset to do the tones, or you get a 'double
ringing' in the handsets of these phones / ATA's then set Admin / Advanced /
Line X / SIP Settings / Sticky 183 to no.
Btw, how's your Asterisk going? I'm in the middle of doing a 7 site Least
Cost Routed DUNDi setup with redundant routes - Good fun though the learning
curve is a bit steep.
Craig
----- Original Message -----
From: "Klaverstyn, David C" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Monday, October 30, 2006 5:06 PM
Subject: RE: [asterisk-users] Incorrect Ring tone. Getting a US tone when
itshould be AU tone
I don't think it is a phone problem. I get a US ring tone on a PAP2,
SPA-942 and IDEFdisk softphone.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul Hales
Sent: Monday, 30 October 2006 5:08 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Incorrect Ring tone. Getting a US tone
whenit should be AU tone
What phones are you using? It could be a phone level issue.
(my aastra has a setting for AU sounds..)
PaulH
On Mon, 2006-10-30 at 16:13 +1100, Klaverstyn, David C wrote:
For some reason Asterisk is producing a US ring tone when it should be
an Australian ring tone. I am using ztdummy and do not have any cards
installed. My configuration is as follows. I am using Trixbox
1.2.2. Can someone please guide me into the right direction?
zaptel.conf
loadzone = au
defaultzone = au
zapata.conf
[channels]
language=au
indications.conf
[general]
country=au
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
