David is correct: there are several issues to resolve.  Some common T1
settings in the USA are:

Framing: ESF

Line coding: B8ZS

These are very common settings.

 

Now you'll need to find out what the signaling type is.  No point trying
to guess - they vary greatly.  If you can find out how the previous
piece of equipment was configured the you'll have a great starting
point.

 

-MC

 

  _____  

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David
Gomillion
Sent: Thursday, January 04, 2007 5:57 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] HowTO configure voice T1

 

T1s can use many different signalling types. You need to find out which
one is running, what the line encoding is, etc. PRI vs T1 are not the
only distinctions...

 

On 1/4/07, Mark Greene <[EMAIL PROTECTED]> wrote: 

Alright guys here is my question. What is do I need to set switchtype,
and signalling to in zapata for a voice T1. This is not a PRI. I cannot
say that enough. It is NOT, A, PRI. It is just a Voice T1 with 24 voice
channels. There is not a D Channel. It runs from one office to another
and USED to plug into two opt. 11c but now one end is going to plug into
an asterisk box. 

- Mark

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com
<http://easynews.com/>  --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users



 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to