What G723 codec do you have on Asterisk? What is your SIP.CONF? What
ATA/Phone is being used and what are the exact settings, especially
for the codec?

On 1/19/07, Phil French <[EMAIL PROTECTED]> wrote:
I am setting up Asterisk for use in a low bandwidth environment.  As
bandwidth is precious and our ATA's support it, the decision was made to
use the g723 codec.  I have been working on this for a few days and have
not been successful.  The issue that I am having is garbled noise at the
client on calls whose RTP streams are terminated by Asterisk system.
This is the case for all the dialplan applications I have tested except
for Echo.  The critical application for us is Voicemail.  When a call to
voicemail extension is initiated the Asterisk console does not indicate
any error.  Packet captures indicate the call is active and streaming
g723 data.  Everything seems well but is not.  The audio at the client
is unrecognizable.  One thing that I have noticed is that the bitrates
in the upstream and downstream direction differ.  From Asterisk to ATA
the g723 bitrate switches between 5.3 kb/s and 6.3 kb/s.  From ATA to
Asterisk the bitrate is a constant 6.3 kb/s.  I don't think this is a
problem but seems odd.  As a comparison I captured packets from a call
to the echo application and found that the bitrate was 6.3 kb/s in both
upstream and downstream packets.  Additionally, all prompts are g723
format.  Voicemail is saved as g723sf.  As a parrallel task a co-worker
has gotten 1.2 to work with g723.  However we require 1.4 for t.38
pass-through.

The end-to-end system is illustrated below.

                      [Asterisk]
                       /     \
                     ip       ip
                     /         \
  [PSTN]--pri--[GATEWAY]--ip--[ATA]<--2pr-->[Phone]

System details
 -Asterisk server version 1.4 - compiled from source - Fedora Core 6
-Gateway - Cisco 2811  -ATA - Linksys 2102

I would appreciate any advice or suggestions.  It should be noted that
the calls to the PSTN through the gateway and calls between ATA's are
working fine.

Regards,

Phil French

Phil French
Systems Engineer
-------------------------------
CapRock Communications
4400 S. Sam Houston Parkway E.
Houston, Texas 77048
Office: 832 668 2643
[EMAIL PROTECTED]
www.caprock.com
--------------------------------------------------------
NOTICE OF CONFIDENTIALITY: This e-mail message may contain confidential 
information and is intended only for the person(s) named above. Any review, 
use, disclosure or distribution by any other person is prohibited. If you are 
not the intended recipient, please contact the sender by e-mail and destroy all 
copies of this message.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to