you don't have to connect the power connecter to TDM if you are using
FXO, it's used with FXS to generate a signal to phones

2007/2/9, MBIT Technologies <[EMAIL PROTECTED]>:
Hi David

Also make sure the power connector is also connected to the board.


Regards


Mark Brooker
T: 02 4959 8670
M: 0415 846 865
F: 02 4950 5609
E: [EMAIL PROTECTED]
W: http://www.mbit.com.au


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Klaverstyn,
David C
Sent: Friday, 9 February 2007 1:08 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] TDM400 with 1 FXO

Hi,

Yes it should, I have changed it back and is still causing the same
problems.



-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann
Boon
Sent: Friday, 9 February 2007 12:02 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] TDM400 with 1 FXO


Klaverstyn, David C wrote:
>
> Hi All,
>
>
>
> I cannot get my TDM to work correctly.
>
>
>
> In my /etc/zaptel.conf file I have
>
> loadzone = us
>
> defaultzone=us
>
>
>
> fxoks=1
>
Shouldn't this be fxsks if you're using an FXO module as analog trunk?

Leo

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to