i did have same issue with DISA in 1.4 and TDM400 FXO, I switched back to Authenticate and waitexten.
On 9/14/07, Benjamin M. <[EMAIL PROTECTED]> wrote: > > > -------------------------------------------------------------------------------------------- > Originally posted at http://forums.digium.com/viewtopic.php?t=18045 > > -------------------------------------------------------------------------------------------- > > Hi! > > I'm trying to configure a DISA setup (Asterisk 1.4.11). Only, executing > DISA seems to prevent any DTMF detection capability when using the FXO > port of the TDM400. > > Below, config A and B and their debug logs. > > In Config A I use Authenticate() instead of using DISA password since it > demonstrates that it's DISA that seems to prevent DTMF detection when > using Zap/1. Otherwise DISA works flawlessly when calls are coming from > FXS port (TDM400), IAX, SIP channels.... and we have absolutely not > other problem detecting DTMF that we are aware of... > > I see no active bug related to DISA at bugs.digium.com... > > Any idea? > > Ben. > > > > *Code:* > > --------------------------- > zapata.conf > --------------------------- > context=inbound-pstn > signalling=fxs_ks > rxgain=10 > txgain=3 > language=fr > channel => 1 > > > > I have tried to change gains without any result ... > (http://forums.digium.com/viewtopic.php?t=17769&highlight=disa+dtmf) > > ; --- Config A --- ; > > *Code:* > > exten => 111,1,Answer > exten => 111,n,Authenticate(111) > exten => 111,n,DISA(no-password|internal) > > > > ; --- Dial sequence --- ; > > *Code:* > > PSTN line -> TDM400 > enter extension 111 -> dial tone > enter password 111 -> "new" dial tone > enter extension -> I still getting the dial tone whatever I'm entering > timeout. > > > > Here the debug log: > > *Code:* > > <snip> > > DTMF digit: 1 on Zap/1-1 > DTMF end '1' received on Zap/1-1, duration 0 ms > DTMF end accepted without begin '1' on Zap/1-1 > DTMF end passthrough '1' on Zap/1-1 > Scheduling timer at 0 sample intervals > Set channel Zap/1-1 to write format ulaw > Oooh, got something to jump out with ('1')! > DTMF digit: 1 on Zap/1-1 > DTMF end '1' received on Zap/1-1, duration 0 ms > DTMF begin emulation of '1' with duration 100 queued on Zap/1-1 > DTMF end emulation of '1' queued on Zap/1-1 > DTMF digit: 1 on Zap/1-1 > DTMF end '1' received on Zap/1-1, duration 0 ms > DTMF begin emulation of '1' with duration 100 queued on Zap/1-1 > DTMF end emulation of '1' queued on Zap/1-1 > == CDR updated on Zap/1-1 > Launching 'Answer' > -- Executing [EMAIL PROTECTED]:1] Answer("Zap/1-1", "") in new stack > Launching 'Authenticate' > -- Executing [EMAIL PROTECTED]:2] Authenticate("Zap/1-1", "111") in new > stack > Set channel Zap/1-1 to write format gsm > Scheduling timer at 160 sample intervals > -- <Zap/1-1> Playing 'agent-pass' (language 'fr') > Scheduling timer at 0 sample intervals > Scheduling timer at 0 sample intervals > Set channel Zap/1-1 to write format ulaw > DTMF digit: 1 on Zap/1-1 > DTMF end '1' received on Zap/1-1, duration 0 ms > DTMF begin emulation of '1' with duration 100 queued on Zap/1-1 > DTMF end emulation of '1' queued on Zap/1-1 > DTMF digit: 1 on Zap/1-1 > DTMF end '1' received on Zap/1-1, duration 0 ms > DTMF begin emulation of '1' with duration 100 queued on Zap/1-1 > DTMF end emulation of '1' queued on Zap/1-1 > DTMF digit: 1 on Zap/1-1 > DTMF end '1' received on Zap/1-1, duration 0 ms > DTMF begin emulation of '1' with duration 100 queued on Zap/1-1 > DTMF end emulation of '1' queued on Zap/1-1 > DTMF digit: # on Zap/1-1 > DTMF end '#' received on Zap/1-1, duration 0 ms > DTMF begin emulation of '#' with duration 100 queued on Zap/1-1 > DTMF end emulation of '#' queued on Zap/1-1 > Set channel Zap/1-1 to write format gsm > Scheduling timer at 160 sample intervals > -- <Zap/1-1> Playing 'auth-thankyou' (language 'fr') > Scheduling timer at 0 sample intervals > Scheduling timer at 0 sample intervals > Set channel Zap/1-1 to write format ulaw > Launching 'DISA' > -- Executing [EMAIL PROTECTED]:3] DISA("Zap/1-1", > "no-password|internal") in new stack > Digittimeout: 3000 > Responsetimeout: 10000 > Mailbox: > Context: internal > DISA no-password login success > Set channel Zap/1-1 to write format slin > Scheduling timer at 160 sample intervals > Scheduling timer at 0 sample intervals > > [ ------------ asterisk isn't detecting any DTMF... ---------- ] > > DISA extension entry timeout on chan Zap/1-1 > Requested indication 8 on channel Zap/1-1 > Set channel Zap/1-1 to write format ulaw > Scheduling timer at 0 sample intervals > Spawn extension (compagnie,111,3) exited non-zero on 'Zap/1-1' > == Spawn extension (compagnie, 111, 3) exited non-zero on 'Zap/1-1' > Soft-Hanging up channel 'Zap/1-1' > Hanging up channel 'Zap/1-1' > zt_hangup(Zap/1-1) > Hangup: channel: 1 index = 0, normal = 7, callwait = -1, thirdcall = -1 > disabled echo cancellation on channel 1 > Set option TDD MODE, value: OFF(0) on Zap/1-1 > Updated conferencing on 1, with 0 conference users > -- Hungup 'Zap/1-1' > > > <snip> > > > > > ; --- Config B --- ; > > *Code:* > > exten => 111,1,Answer > exten => 111,n,DISA(111|internal) > > > > ; --- Dial sequence --- ; > > *Code:* > > PSTN line -> TDM400 > enter extension 111 -> dial tone > enter password 111 -> I still getting the dial tone whatever I'm entering > password timeout. > > > > Here the debug log: > > *Code:* > > <snip> > DTMF digit: 1 on Zap/1-1 > DTMF end '1' received on Zap/1-1, duration 0 ms > DTMF end accepted without begin '1' on Zap/1-1 > DTMF end passthrough '1' on Zap/1-1 > Scheduling timer at 0 sample intervals > Set channel Zap/1-1 to write format ulaw > Oooh, got something to jump out with ('1')! > DTMF digit: 1 on Zap/1-1 > DTMF end '1' received on Zap/1-1, duration 0 ms > DTMF begin emulation of '1' with duration 100 queued on Zap/1-1 > DTMF end emulation of '1' queued on Zap/1-1 > DTMF digit: 1 on Zap/1-1 > DTMF end '1' received on Zap/1-1, duration 0 ms > DTMF begin emulation of '1' with duration 100 queued on Zap/1-1 > DTMF end emulation of '1' queued on Zap/1-1 > == CDR updated on Zap/1-1 > Launching 'Answer' > -- Executing [EMAIL PROTECTED]:1] Answer("Zap/1-1", "") in new stack > Launching 'DISA' > -- Executing [EMAIL PROTECTED]:2] DISA("Zap/1-1", "111|internal") in > new stack > Digittimeout: 3000 > Responsetimeout: 10000 > Mailbox: > Context: internal > Set channel Zap/1-1 to write format slin > Scheduling timer at 160 sample intervals > Scheduling timer at 0 sample intervals > > [ ------------ asterisk isn't detecting any DTMF... ---------- ] > > DISA password entry timeout on chan Zap/1-1 > Requested indication 8 on channel Zap/1-1 > Set channel Zap/1-1 to write format ulaw > Scheduling timer at 0 sample intervals > Spawn extension (compagnie,111,2) exited non-zero on 'Zap/1-1' > == Spawn extension (compagnie, 111, 2) exited non-zero on 'Zap/1-1' > Soft-Hanging up channel 'Zap/1-1' > Hanging up channel 'Zap/1-1' > zt_hangup(Zap/1-1) > Hangup: channel: 1 index = 0, normal = 7, callwait = -1, thirdcall = -1 > disabled echo cancellation on channel 1 > Set option TDD MODE, value: OFF(0) on Zap/1-1 > Updated conferencing on 1, with 0 conference users > -- Hungup 'Zap/1-1' > <snip> > > > _______________________________________________ > > Sign up now for AstriCon 2007! September 25-28th. > http://www.astricon.net/ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users