I am having trouble with chan_zap.so not loading. When I load it from modules.conf, Asterisk bails out without any error message. When I load it from the console, it just says "Unable to load module chan_zap.so" no matter what verbose level I am using.
dmesg says: Zaptel Version: 1.4.4 Zaptel Echo Canceller: MG2 Freshmaker version: 73 Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO Module 1: Installed -- AUTO FXO (FCC mode) Module 2: Installed -- AUTO FXO (FCC mode) Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules) Registered tone zone 1 (Australia) lsmod says: wctdm 30912 0 wcfxo 9344 0 zaptel 180388 2 wctdm,wcfxo ztcfg -vv says: Zaptel Version: 1.4.4 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXO Loopstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels to configure. cat /proc/zaptel/* says: Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" 1 WCTDM/0/0 FXOLS 2 WCTDM/0/1 FXSKS 3 WCTDM/0/2 FXSKS 4 WCTDM/0/3 FXSKS /etc/zaptel.conf is: # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" fxols=1 fxsks=2 fxsks=3 fxsks=4 # Global data loadzone = au defaultzone = au I have Googled for help but not found anything. Does anyone have any suggestions? TIA -- Jeremy Malcolm LLB (Hons) B Com Internet and Open Source lawyer, IT consultant, actor host -t NAPTR 1.0.8.0.3.1.2.9.8.1.6.e164.org|awk -F! '{print $3}' Luxury Perth apartment for sale! http://www.yourestate.com.au/sresult.php?property_id=8581 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users