Hi, in tftp server I have the followings files:

apps11.1-1-3-15.sbn
cnu11.3-1-3-15.sbn
copstart.sh
cvm11sip.8-0-3-16.sbn
dsp11.1-1-3-15.sbn
jar11sip.8-0-3-16.sbn
load307
load369
SIP11.8-0-4SR1S.loads
term06.default.loads
term11.default.loads

..and on 7906g in status menu I have:

load file: sccp11.8-3-2s
app load id: jar11sccp.8-3-1-22.sbn
jvm load id: cvm11sccp.8-3-1-22.sbn
os load id: cnu11.8-3-1-22.sbn
boot load id: tnp06.3-0-1-31.bin
dsp load id: dsp11.8-3-1-22.sbn

I need other files other than those obtained with 
cmterm-7911_7906-sip.8-0-4sr1.cop ??
Thanks in advance.

------

   Salvatore.



----- Original Message ----- 
From: "Duncan Turnbull" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users@lists.digium.com>
Sent: Tuesday, October 07, 2008 1:04 PM
Subject: Re: [asterisk-users] Cisco 7906g & SIP


> Are you sure you have set the 7960 to SIP?
>
> By default they use SCCP, so you need to go through the process of
> changing them over, which ideally would just be done with the edits you
> have already in the load files but generally means going back to an
> early version of the SIP code then working upwards from there.
>
> You can check the current hardware in the status, if its SIP it will be
> something like POS-0806... (I haven't got a phone handy to check) but
> there is a reasonable amount of info on voipinfo about the process
>
> Cheers Duncan
>
> Sasa wrote:
>> Hi, I have a problem with Cisco 7906G and SIP protocol use with Asterisk
>> 1.2.26.
>> I have uploaded in my tftp server the firmware
>> 'cmterm-7911_7906-sip.8-0-4SR1' that use 'SIP11.8-0-4SR1S.loads' and in
>> SEPmacaddress.cnf.xml I have:
>>
>> <loadInformation>SIP11.8-0-4SR1S</loadInformation>
>>
>> ..but in tftp log server I have:
>>
>> Oct 07 11:56:22 asterisk1.local atftpd[6230.-1208161360]: Serving
>> CTLSEPmacaddress.tlv to 192.168.0.155:49152
>> Oct 07 11:56:22 asterisk1.local atftpd[6230.-1208161360]: Serving
>> SEPmacaddress.cnf.xml to 192.168.0.155:49153
>>
>> ..and in asterisk CLI I have:
>>
>> -- Starting Skinny session from 192.168.0.155
>> Device SEPmacaddress is attempting to register
>>
>> Now when 7906G started is loaded:
>>
>> load file: sccp11.8-3-2s
>> boot load id: tnp06.3-0-1-31.bin
>>
>> ..why isn't loaded sip firmware ??
>> Thanks in advance.
>>
>> ------
>>
>>    Salvatore.
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>> Register Now: http://www.astricon.net
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to