ok thanks for support and help 2013/3/27 Yves A. <yves...@gmx.de>
> you have already listed the two config files for using zaptel. > on first sight, they look ok to me (did not use zaptel for years now) > maybe you should definitely comment out any span that is not in use... or > do the opposite. > i´ve seen this warning several times, but i cant remember it had anything > to do with spans > being configured but not used. > it always had something to do with timing or even defective cards or > cabling or even wrong > settings on providers´ site. > > what changes were made to the system so that these warnings occur? or have > they been > visible from the very start? do they affect telefony (e.g. loss of calls, > one side audio only etc.)? > how much load (concurrent calls) is on the asterisk, does the warning > occur periodically or > only a few times? > these are all questions you should ask yourself to help you find the > answer yourself... it can > be very frustrating sometimes, but for me, thats all i can tell about. > > regards, > yves > > Am 27.03.2013 13:06, schrieb Salaheddine Elharit: > > thank you for your help ,but which configure script and when i can find > this script ? in etc/asterisk > > > best regards > > 2013/3/27 Thorsten Göllner <t...@ovm-group.com> > >> You do use only span 1 and 6? So the other ports are not plugged? That >> is the cause for the warnings. I use a Sangoma E1-Card. The configure >> script gives me the option "unused" for any port. Maybe your configure >> script offers you the same option. >> >> Am 27.03.2013 11:54, schrieb Salaheddine Elharit: >> >> Hi >> >> i use 2 digium cards 1 card with 2 ports and the second card with 4 >> ports >> >> >> >> but actually i use just the span 1 and span 6 >> >> >> >> Asterisk 1.4-r110474M >> >> >> >> i use E1 ports >> >> >> zaptel.conf >> >> >> >> # Autogenerated by /usr/sbin/zapconf on Wed Feb 20 10:13:17 2013 -- do >> not hand edit >> >> # Zaptel Configuration File >> >> # >> >> # This file is parsed by the Zaptel Configurator, ztcfg >> >> # >> >> # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS RED >> >> span=1,1,0,ccs,hdb3 >> >> # termtype: te >> >> bchan=1-15,17-31 >> >> dchan=16 >> >> >> # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED >> >> span=2,2,0,ccs,hdb3 >> >> # termtype: te >> >> bchan=32-46,48-62 >> >> dchan=47 >> >> >> # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" >> >> # span=3,3,0,ccs,hdb3 >> >> # termtype: te >> >> # bchan=63-77,79-93 >> >> # dchan=78 >> >> >> # Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" >> >> # span=4,4,0,ccs,hdb3 >> >> # termtype: te >> >> # bchan=94-108,110-124 >> >> # dchan=109 >> >> >> # Span 5: TE2/1/1 "T2XXP (PCI) Card 1 Span 1" >> >> span=5,5,0,ccs,hdb3 >> >> # termtype: te >> >> bchan=125-139,141-155 >> >> dchan=140 >> >> >> # Span 6: TE2/1/2 "T2XXP (PCI) Card 1 Span 2" >> >> span=6,6,0,ccs,hdb3 >> >> # termtype: te >> >> bchan=156-170,172-186 >> >> dchan=171 >> >> >> # Global data >> >> >> loadzone = us >> >> defaultzone = us >> >> >> >> >> etc/asterisk/zapata.conf >> >> >> [channels] >> >> context=default >> >> hidecallerid=no >> >> callwaiting=yes >> >> usecallingpres=yes >> >> callwaitingcallerid=yes >> >> threewaycalling=yes >> >> transfer=yes >> >> canpark=yes >> >> cancallforward=yes >> >> callreturn=yes >> >> rxgain=0.0 >> >> txgain=0.0 >> >> >> group=1 >> >> switchtype=euroisdn >> >> signalling=pri_cpe >> >> callgroup=1 >> >> pickupgroup=1 >> >> immediate=no >> >> channel => 1-15,17-31 >> >> >> group=2 >> >> callgroup=2 >> >> switchtype=qsig >> >> signalling=pri_net >> >> callerid=mycallerid >> >> immediate=no >> >> channel => 156-170 >> >> channel => 172-176 >> >> channel => 125-139 >> >> channel => 141-155 >> >> >> thanks and regards >> >> >> >> 2013/3/27 Yves A. <yves...@gmx.de> >> >>> Am 26.03.2013 17:57, schrieb Salaheddine Elharit: >>> >>> Hello, >>> >>> i have all the time this warning i use asterisk 1.4 all works without >>> issue i don't have any problem (i can use the inbound and outbound calls >>> without issue) >>> >>> i just want to know what is this WARNING >>> >>> thanks and regards >>> >>> >>> WARNING[28151]: chan_zap.c:2404 pri_find_dchan: No D-channels >>> available! Using Primary channel 140 as D-channel anyway! >>> >>> >>> this can have different causes... mostly a wrong setting in your zaptel >>> configuration file... this could be e.g. >>> mixing american / european settings (e1/t1), >>> wrong timing settings, >>> wrong master / source clock setting, >>> [...] >>> post more details... what span (e1 or t1), which hardware, driver >>> version, asterisk version, config files... >>> >>> >>> regards, >>> >> >> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users