On Friday 10 December 2004 14:42, Greg - Cirelle Enterprises wrote: > At 09:09 AM 12/10/04, you wrote: > >On Friday 10 December 2004 13:53, Greg - Cirelle Enterprises wrote: > > > At 07:05 AM 12/10/04, you wrote: > > > >greg wrote: > > > >>Transfer feature is not enabled in 1.0.5.18 for asterisk, it is for > > > >> Nortel > > > > > > > >Diego Aguirre wrote: > > > >I use atendent transfer in Asterisk!!! > > > > > > ok, the # extension key combo > > > > > > too bad the 3 buttons cannot be programmed to emulate > > > the functions to make it work. i.e. the transfer button > > > to send the key code of the # key, etc... same with > > > conference and flash. > > > >It does work. > > > >Make sure on configuration page, you set "send flash event" to be NO, then > >pressing flash will not send any dtmf signal, but try to open another > >session. > > > >A talk to B, > >B press flash and hear dial tone, > >B dial C an talk to C. > >B press transfer to let A talk to C. then B hangs up. > > > > > >B > > That worked! > > How did you determine that sequence?
I did what everyone should do in the first place, ask the manufacturers. I find Grandstream very accommodating. B _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users