Hi Keith, I have a TFTP server set up with the proper files on it, but after a factory reset, how does the phone know where to find the TFTP server..? I cannot get into it to set the TFTP server IP address.
Thanks On Wed, 16 Feb 2005 20:02:22 -0500 "Keith O'Brien" <[EMAIL PROTECTED]> wrote: > It is trying to download its firmware. You need to setup a TFTP Server. > > Also be aware that the 7970 only supports SCCP not SIP. Further, the * > implementation of SCCP doesn't support the latest version of SCCP which is > required for the 7970. I don't see how it would work at all with *. > > > > > >>Hi Everyone - > > >>I just got my hands on a Cisco 7970 and was told that I should do a > >>factory reset before trying to configure it to work with Asterisk. > > >>After the factory reset, it will not boot at all, instead sits with the > >>line button lights flashing one at a time in sequence. > > >>I have had no luck trying to figure it out - anyone run into the same > >>problem that can lend a hand..? > > > > > ****************************************** Richard J. Sears Vice President American Internet Services ---------------------------------------------------- [EMAIL PROTECTED] http://www.adnc.com ---------------------------------------------------- 858.576.4272 - Phone 858.427.2401 - Fax INOC-DBA - 6130 ---------------------------------------------------- I fly because it releases my mind from the tyranny of petty things . . "Work like you don't need the money, love like you've never been hurt and dance like you do when nobody's watching." _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users