Hi,
Did you tried to set your DMA or SATA as described at message "Sangoma A102 cards testing FIXED"?
Daniel
Kumak wrote:
Hello, I have following problem with Sangoma A104 card:
CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3
NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
Any idea how to fix it?
My configs:
zaptel.conf:
span=1,1,1,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16
zapata.conf
[channels] switchtype=euroisdn pridialplan=unknown overlapdial=no usecallerid=yes hidecallerid=yes callwaiting=no callwaitingcallerid=no threewaycalling=no transfer=no cancallforward=no callreturn=no jitterbuffers=4 echocancel=yes echocancelwhenbridged=no echotraining=yes relaxdtmf=yes rxgain=0.5 txgain=0.9 immediate=no amaflags=billing adsi=no busydetect=no callprogress=no context = zapline1 switchtype = euroisdn group=1 signalling = pri_cpe channel => 1-15 channel => 17-31
cat /proc/zaptel/1 :
Span 1: WPE1/0 "wanpipe1 card 0" HDB3//CRC4
1 WPE1/0/1 Clear (In use) 2 WPE1/0/2 Clear (In use) 3 WPE1/0/3 Clear (In use) 4 WPE1/0/4 Clear (In use) 5 WPE1/0/5 Clear (In use) 6 WPE1/0/6 Clear (In use) 7 WPE1/0/7 Clear (In use) 8 WPE1/0/8 Clear (In use) 9 WPE1/0/9 Clear (In use) 10 WPE1/0/10 Clear (In use) 11 WPE1/0/11 Clear (In use) 12 WPE1/0/12 Clear (In use) 13 WPE1/0/13 Clear (In use) 14 WPE1/0/14 Clear (In use) 15 WPE1/0/15 Clear (In use) 16 WPE1/0/16 HDLCFCS (In use) 17 WPE1/0/17 Clear (In use) 18 WPE1/0/18 Clear (In use) 19 WPE1/0/19 Clear (In use) 20 WPE1/0/20 Clear (In use) 21 WPE1/0/21 Clear (In use) 22 WPE1/0/22 Clear (In use) 23 WPE1/0/23 Clear (In use) 24 WPE1/0/24 Clear (In use) 25 WPE1/0/25 Clear (In use) 26 WPE1/0/26 Clear (In use) 27 WPE1/0/27 Clear (In use) 28 WPE1/0/28 Clear (In use) 29 WPE1/0/29 Clear (In use) 30 WPE1/0/30 Clear (In use) 31 WPE1/0/31 Clear (In use)
Information from dmesg:
Processing WAN device wanpipe1... wanpipe1: Locating: A104 card, CPU A, PciSlot=8, PciBus=0 wanpipe1: Found: A104 card, CPU A, PciSlot=8, PciBus=0, Port=0 PCI: Found IRQ 10 for device 00:08.0 wanpipe1: AFT PCI memory at 0xEE000000 wanpipe1: IRQ 10 allocated to the AFT PCI card wanpipe1: Initializing for SMP wanpipe1: Starting AFT Quad Hardware Init. wanpipe1: Enabling front end link monitor wanpipe1: Global Chip Configuration: used=1 wanpipe1: Global Front End Configuraton! wanpipe1: T1/E1/J1 Global configuration! wanpipe1: AFT Data Mux Bit Map: 0x76543210 wanpipe1: Setting E1 configuration (Port 1)! wanpipe1: All channels enabled wanpipe1: Front end successful wanpipe1: AFT Security: UnChannelised wanpipe1: Configuring Device :wanpipe1 FrmVr=8 wanpipe1: Global MTU = 1500 wanpipe1: Global MRU = 1500 wanpipe1: Data Mux Map = 0x76543210 wanpipe1: Configuring Interface: w1g1 wanpipe1:w1g1: Running in TDM Voice mode. wanpipe1: AFT Fifo Level Map: 0x02082082 wanpipe1: Registering interface to Zaptel span # 1! wanpipe1: MRU :248 wanpipe1: MTU :248 wanpipe1: HDLC Eng :Off (Transparent) wanpipe1: Data Mux Ctrl :On wanpipe1:w1g1: Active channels = 0xFFFFFFFE wanpipe1:w1g1: Setting first time slot to 1 wanpipe1:w1g1: Config for Transparent mode: Idle=0 Len=248 wanpipe1:w1g1: Allocating 65 dma skb len=256 Chaining=Off
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users