Matt Gibson wrote:
Sounds like you would be fine if the power completely drops out. but there are 2 things I canGreetings,
I have a server I'm working on here with two tdm cards in it.
4 FXS and 4FX0. Both cards work fine on their own. The problem
lies with using both in the system at once. I have verified the
IRQ's are fine. I have tried switching the slots the cards reside in, no luck though. I am using ACPI but not APM. I am using gentoo latest, with vanilla 2.6(.10) kernel and udev. CVS as of CVS-HEAD-03/02/05-03:42:41.
The problem is as follows:
If I power up the system from system off, the cards both get detected
If I reboot the system with reset button, ctrl alt del, or 'reboot' the TDM04P does not get detected.
If I then reboot, then hit the power button, and let it turn off, then turn it back on again and boot, it detects both cards fine.
I have tried searchign the list archives, but I have not had much luck. One person on IRC mentioned he's seen this before, but didn't have any
solutions.
Does anyone here know what might be the problem? or have a fix/work around? I know I shouldnt be rebooting servers, but I have to make sure it works upon reboot as it is going to be installed in a power-outtage happy part of the world :)
TIA, Matts
think of.
In zconfig.h (in the zaptel directory) there is a line at the bottom (at least in my cvs version)
/*
* Uncomment if you happen have an early TDM400P Rev H which
* sometimes forgets its PCI ID to have wcfxs match essentially all * subvendor ID's
*/
#define TDM_REVH_MATCHALL
The other is a bit more involved and can be found here:
http://lists.digium.com/pipermail/asterisk-users/2004-October/070000.html
This might be a bit different with the newer software, but the basic idea is the same
Regards Greg
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
