Scott, I'm new to *, but I know T1s pretty well - most likely you're not getting that information with your wink-start trunk. Most of the time, you're only getting the DNIS (dialed number), not the ANI (calling party). Here's a Cisco doc that explains CAS circuits a bit:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800e2560.shtml Eric On Thu, 17 Mar 2005 13:17:37 -0600, Scott Nelson <[EMAIL PROTECTED]> wrote: > I am an Asterisk newby, and I cannot seem to get Caller ID information > from our T1 line. When calls appear at the phones, they say the call > came from "asterisk" and unknown number. > > I know how Caller ID information is passed on an analog phone line > (between the rings) but with a T1 line, I don't know technically how it > is done. > > I don't see the caller's number in the CDR records either. > > What am I missing -- where shall I search? > -- > Scott Nelson > Thermeon Corporation - St. Louis > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users