Follwing the information from the wiki (http://www.voip-info.org/wiki-Asterisk+phone+snom) and the mailing list, I have been able to get my Snom 190 to monitor extension states accurately.
I have noticed a couple oddities, however, that I am hoping I can get explanation on so that I can know more about * and SIP: - It appears that I cannot use variables in the "hint" priority exten lines. So "exten => 22,hint,Zap/2" will work fine, but (assuming Ext22 = Zap/2) "exten => 22,hint,${Ext${EXTEN}}" will not. Why is that? - It appears that the extension used with the "hint" must be the same as the extension used to dial that channel. So if extension 22 will ring Zap/2, then "exten => 22,hint,Zap/2" will work, but "exten => 222,hint,Zap/2" will not. Why is that? - If I am correct in the above, then there is no way for me to monitor a channel that is not an extension. As an example, I have a TDM400 with 3 FXS (Zap/1-3 on extensions 21-23) and 1 FXO (Zap/4) as well as a VoIP channel for dialing out. I can monitor the states of the extensions with extension entries like "exten => 21,hint,Zap/1" but I cannot monitor the state of the FXO with "exten => 0,hint,Zap/4" because 0 is not the extension of Zap/4. Indeed, Zap/4 has no extension. Is it not possible to monitor that line, then? Thank you very much! -- -M There are 10 kinds of people in this world: Those who can count in binary and those who cannot. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users