On Tuesday 12 April 2005 10:18 am, MobilPete wrote:can anyone help ??
trying to get Polycom IP300 to utilize both lines, would like calls to roll
to open line when incoming call arrives while user is on line 1. Looked
everywhere and tried many things with no luck.
Do you have your lines register sepratly? E.g. is there a seperate entry in
sip.conf for each line or do they both register as the same sip device?
Yes, a good way to do it is to register each line separately, like this:
sip.conf [100] type=friend username=100 secret=100 callerid="100" host=dynamic dtmfmode=rfc2833 context=extensions_context [EMAIL PROTECTED] disallow=all allow=ulaw
[100b] type=friend username=100b secret=100b callerid="100" host=dynamic dtmfmode=rfc2833 context=extensions_context disallow=all allow=ulaw
Then, you can use SetGroup and CheckGroup like this in your dialplan to bypass the annoying call waiting "feature":
extensions.conf exten => 100,1,SetGroup(100) exten => 100,2,CheckGroup(1) exten => 100,103,Goto(100b,1) exten => 100,3,Dial(SIP/100,20) exten => 100,4,Voicemail(su100) exten => 100,5,Hangup
exten => 100b,1,Dial(SIP/100b,20) exten => 100b,2,Voicemail(sb100) exten => 100b,3,Hangup exten => 100b,102,Voicemail(sb100) exten => 100b,103,Hangup
- Noah
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users