On Mon, 18 Apr 2005 11:54:09 -0600 Rich Adamson <[EMAIL PROTECTED]> wrote:
Inline...
Hi, I did not find any useful information to configure a Wildcard^^^^^^ that should be fxsks (might also try fxsks=3 since your only module is #3. I don't remember how these are numbered for sure.
TDM400P with a FXO card. I've tried everithing, I tried configure it
using the cvs and the information from digium page, I tried to
configure it using
debian packages, I tried to configure with kernels 2.4.30 and 2.6.11, I even
switched the mother board (I tried 3 motherboards).
I tanks in advace any help you could give me.
Best Regards, Gregorio Toscano [EMAIL PROTECTED]
The erros are:
Apr 15 16:08:37 WARNING[1468]: chan_zap.c:850 zt_open: Unable to
specify channel 1: No such device
Apr 15 16:08:37 ERROR[1468]: chan_zap.c:6458 mkintf: Unable to open
channel 1: No such device
here = 0, tmp->channel = 1, channel = 1
Apr 15 16:08:37 ERROR[1468]: chan_zap.c:9558 setup_zap: Unable to
register channel '1'
My configuration files are:
lsmod Module Size Used by Not tainted wctdm 97248 0 (unused) zaptel 214784 0 [wctdm]
dmesg (final):
Module 0: Not installed
Module 1: Not installed
Module 2: Not installed
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
najay:/etc# cat zaptel.conf loadzone = us defaultzone = us fxs_ks=1
Don't forget to run 'ztcfg -vv' after the modprobes. That should
tell you which channel the fxo module is on.
<SNIP>
In actuality, the modules start at "1" and not "0". So you would need "fxsks=4" in your zaptel.conf.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
