Zttool shows nothing inside thebox. I tried removing the x100 cards, moving the tdm card around, disabled all usb and unnecessary stuff still, kudzu when booting up shows the card and the card shows up on /etc/sysconfig/hwconf but I wonder why it shows 2 of these and I only have 1 tdm400p card with 1 module
class: MODEM bus: PCI detached: 1 driver: hisax desc: "Tiger Jet Network Inc.|Intel 537" vendorId: e159 deviceId: 0001 subVendorId: 8086 subDeviceId: 0003 pciType: 1 - class: MODEM bus: PCI detached: 1 driver: hisax desc: "Tiger Jet Network Inc.|Intel 537" vendorId: e159 deviceId: 0001 subVendorId: 8086 subDeviceId: 0003 pciType: 1 Still, interrupts doesn't show the card [EMAIL PROTECTED] root]# cat /proc/interrupts CPU0 0: 3994353 XT-PIC timer 1: 2 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 10: 95510 XT-PIC eth0 14: 129871 XT-PIC ide0 NMI: 0 ERR: 0 And when trying to load the drvier [EMAIL PROTECTED] root]# modprobe zaptel [EMAIL PROTECTED] root]# modprobe wctdm /lib/modules/2.4.20-8/misc/wctdm.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20-8/misc/wctdm.o: insmod /lib/modules/2.4.20-8/misc/wctdm.o failed /lib/modules/2.4.20-8/misc/wctdm.o: insmod wctdm failed You have new mail in /var/spool/mail/root I tried using diff. modules with no luck.,..... Could be the mobo itself? |-----Original Message----- |From: [EMAIL PROTECTED] |[mailto:[EMAIL PROTECTED] On Behalf Of |Rich Adamson |Sent: Viernes, 29 de Abril de 2005 08:59 a.m. |To: Asterisk Users Mailing List - Non-Commercial Discussion |Subject: Re: [Asterisk-Users] Problems with TDM400P card | |> I have a problem getting a TDM400P card to go. |> |> It has 4 FXS ports (green modules) and I get this error: |> |> [EMAIL PROTECTED] root]# ztcfg -vvvvv |> |> Zaptel Configuration |> ====================== |> |> |> Channel map: |> |> Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS |> Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) |> (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Slaves: |04) Channel |> 05: FXO Kewlstart (Default) (Slaves: 05) Channel 06: FXO Kewlstart |> (Default) (Slaves: 06) |> |> 6 channels configured. |> |> ZT_CHANCONFIG failed on channel 3: Invalid argument (22) Did you |> forget that FXS interfaces are configured with FXO |signalling and that |> FXO interfaces use FXS signalling? |> |> My zaptel.conf reads: |> |> [EMAIL PROTECTED] root]# more /etc/zaptel.conf |> fxsks=1 |> fxsks=2 |> fxoks=3-6 |> loadzone=us |> defaultzone=us |> |> And my rc.local loads: |> |> /sbin/modprobe zaptel |> /sbin/modprobe wcfxo |> /sbin/modprobe wctdm |> |> The 2 100p cards load perfectly but the TDM is not. |> |> Any ideas? | |What does zttool indicate? | |Have you tried moving the cards around in different slots? | |Any shared interrupt issues? | |Try loading wctdm before wcfxo. | |Try removing the x100p's and loading the TDM card only. Any issues? | | |_______________________________________________ |Asterisk-Users mailing list |Asterisk-Users@lists.digium.com |http://lists.digium.com/mailman/listinfo/asterisk-users |To UNSUBSCRIBE or update options visit: | http://lists.digium.com/mailman/listinfo/asterisk-users | | _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users