> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Mike Clark > Sent: Wednesday, May 18, 2005 4:53 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] Outbound dialing issue with FXO > > We are installing a number of systems with 2 TDM04B cards. > Have done all the isolation to unique IRQs, etc. All inbound > calls seem to work fine. > However, outbound calls are hit or miss. Sometimes they work > fine and other times we get a "you must first dial a 1 or 0" > message back from telco when dialing out standard POTS lines.
Try adding a couple of "w"'s in your dial plan to each of the dialed numbers. Two seem to do the best and give about a second before the dial starts to allow for the dial tone to kick in. RObert _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users