On Sun, Nov 15, 2020 at 09:45:44AM -0800, Jim Meyering wrote: > Karl has made quite a few improvements, so I'm preparing to make a new > release. But first, I wanted to make the tests pass reliably also when > running them in parallel (the only way I run them, because otherwise, > they take way too long). I run a command like this: > > make check AM_TESTSUITE_MAKE="make -j$(( 2*$(nproc) + 1 ))" > > That evoked a surprising number of test failures. Note that these are > nondeterministic and depend on the amount of parallelism. All tests > may pass consistently on a system with 2 cores, yet some will fail > every time when nproc prints at least 6. > > I've fixed a few of these failures, but here is still at least one > that I have not fixed: t/txinfo-no-clutter. In this case, running it > with no parallelism and by itself passes: > make -k check TESTS='t/txinfo-no-clutter' > Yet running it with parallel make fails (I'm using make-4.3.90 built > from git, in case it matters): > make -k check TESTS='t/txinfo-no-clutter' AM_TESTSUITE_MAKE="make > -j$(( 2*$(nproc) + 1 ))" > > Not sure I'll work more on this today, so sharing: The attached log > shows that this fails when building that test's final "all" rule, > often because a .dvi file could not be found: > > ) localization,mv: cannot stat 'bar.dvi': No such file or directory > > I've attached the four commits I'm about to push as well as that > individual testsuite.log, in case someone wants to help accelerate the > process.
I got the same with the recent version in git: ran OK with make -k check TESTS='t/txinfo-no-clutter' but broke with make -k check TESTS='t/txinfo-no-clutter' AM_TESTSUITE_MAKE="make -j$(( 2*$(nproc) + 1 ))" My make version is GNU Make 4.1. I'm attaching testsuite.log.
========================================== GNU Automake 1.16b: ./test-suite.log ========================================== # TOTAL: 1 # PASS: 0 # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 FAIL: t/txinfo-no-clutter ========================= txinfo-no-clutter: running makeinfo --version texi2any (GNU texinfo) 6.7dev Copyright (C) 2020 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. txinfo-no-clutter: running texi2dvi --version texi2dvi (GNU Texinfo 6.7dev) Copyright (C) 2019 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. txinfo-no-clutter: running dvips --version This is dvips(k) 5.997 Copyright 2017 Radical Eye Software kpathsea version 6.2.3 Copyright 2017 Radical Eye Software. There is NO warranty. You may redistribute this software under the terms of the GNU General Public License and the Dvips copyright. For more information about these matters, see the files named COPYING and dvips.h. Primary author of Dvips: T. Rokicki. Running from installcheck: no Test Protocol: none PATH = /home/g/src/automake-GIT/automake/bin:/home/g/src/automake-GIT/automake/t/ax:/home/g/go/bin:/home/g/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/usr/local/go/bin:/home/g/.emacs.d/bin/doom ++ pwd /home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir + cat + cat + mkdir sub doc + cat + cat + cat + cat + cp baz.texi sub + aclocal-1.16 -Werror + automake-1.16 --foreign -Werror -Wall --add-missing Makefile.am:2: installing './mdate-sh' Makefile.am:2: installing './texinfo.tex' sub/Makefile.am:2: installing 'sub/texinfo.tex' + autoconf + ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating sub/Makefile + for fmt in info pdf ps dvi html all + make -j5 info Making info in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \ for f in baz.info baz.info-[0-9] baz.info-[0-9][0-9] baz.i[0-9] baz.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I . \ -o baz.info baz.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./baz.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \ for f in baz.info baz.info-[0-9] baz.info-[0-9][0-9] baz.i[0-9] baz.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I . \ -o baz.info baz.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./baz.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' Updating ./version.texi Updating ./doc/version2.texi restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \ for f in foo.info foo.info-[0-9] foo.info-[0-9][0-9] foo.i[0-9] foo.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I . \ -o foo.info foo.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./foo.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \ for f in doc/bar.info doc/bar.info-[0-9] doc/bar.info-[0-9][0-9] doc/bar.i[0-9] doc/bar.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I doc -I ./doc \ -o doc/bar.info ./doc/bar.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./doc/bar.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + ls -l . doc sub .: total 352 -rw-rw-r-- 1 g g 27212 Nov 15 18:05 aclocal.m4 drwxr-xr-x 2 g g 4096 Nov 15 18:05 autom4te.cache -rw-rw-r-- 1 g g 226 Nov 15 18:05 baz.info -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rwxrwxr-x 1 g g 7400 Nov 15 18:05 compile -rw-rw-r-- 1 g g 5411 Nov 15 18:05 config.log -rwxrwxr-x 1 g g 25438 Nov 15 18:05 config.status -rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure -rw-rw-r-- 1 g g 123 Nov 15 18:05 configure.ac -rwxrwxr-x 1 g g 23568 Nov 15 18:05 depcomp drwxrwxr-x 2 g g 4096 Nov 15 18:05 doc -rw-rw-r-- 1 g g 207 Nov 15 18:05 foo.info -rw-rw-r-- 1 g g 101 Nov 15 18:05 foo.texi -rwxrwxr-x 1 g g 15358 Nov 15 18:05 install-sh -rw-rw-r-- 1 g g 41057 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 112 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 40226 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh -rwxrwxr-x 1 g g 6878 Nov 15 18:05 missing -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-vti drwxrwxr-x 2 g g 4096 Nov 15 18:05 sub lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex -rw-rw-r-- 1 g g 97 Nov 15 18:05 version.texi doc: total 16 -rw-rw-r-- 1 g g 207 Nov 15 18:05 bar.info -rw-rw-r-- 1 g g 102 Nov 15 18:05 bar.texi -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-1 -rw-rw-r-- 1 g g 97 Nov 15 18:05 version2.texi sub: total 60 -rw-rw-r-- 1 g g 226 Nov 15 18:05 baz.info -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 76 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex + case $fmt in + test -f foo.info + test -f doc/bar.info + test -f baz.info + test -f sub/baz.info + ls -d foo.info foo.texi baz.info baz.texi sub/baz.info sub/baz.texi doc/bar.info doc/bar.texi + basename_rx='(foo|doc/bar|baz|sub/baz)' + case $fmt in + extension_rx='(texi|info)' + /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|info)$' lst + case $fmt in + rm -f baz.info foo.info doc/bar.info sub/baz.info + for fmt in info pdf ps dvi html all + make -j5 pdf Making pdf in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --pdf --batch --build-dir=baz.t2p -o baz.pdf \ baz.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --pdf --batch --build-dir=foo.t2p -o foo.pdf \ foo.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I doc -I ./doc' \ texi2dvi --pdf --batch --build-dir=doc/bar.t2p -o doc/bar.pdf \ `test -f 'doc/bar.texi' || echo './'`doc/bar.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --pdf --batch --build-dir=baz.t2p -o baz.pdf \ baz.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././foo.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,entering extended mode (../../../../.././doc/bar.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: markup, glyphs, pdf, page headings, tables, fonts, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) formatting, localization, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on foo.pdf (1 page, 14745 bytes). Transcript written on foo.log. formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on bar.pdf (1 page, 14745 bytes). Transcript written on bar.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + ls -l . doc sub .: total 388 -rw-rw-r-- 1 g g 27212 Nov 15 18:05 aclocal.m4 drwxr-xr-x 2 g g 4096 Nov 15 18:05 autom4te.cache -rw-rw-r-- 1 g g 14745 Nov 15 18:05 baz.pdf drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2p -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rwxrwxr-x 1 g g 7400 Nov 15 18:05 compile -rw-rw-r-- 1 g g 5411 Nov 15 18:05 config.log -rwxrwxr-x 1 g g 25438 Nov 15 18:05 config.status -rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure -rw-rw-r-- 1 g g 123 Nov 15 18:05 configure.ac -rwxrwxr-x 1 g g 23568 Nov 15 18:05 depcomp drwxrwxr-x 3 g g 4096 Nov 15 18:05 doc -rw-rw-r-- 1 g g 14745 Nov 15 18:05 foo.pdf drwxrwxr-x 3 g g 4096 Nov 15 18:05 foo.t2p -rw-rw-r-- 1 g g 101 Nov 15 18:05 foo.texi -rwxrwxr-x 1 g g 15358 Nov 15 18:05 install-sh -rw-rw-r-- 1 g g 88 Nov 15 18:05 lst -rw-rw-r-- 1 g g 41057 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 112 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 40226 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh -rwxrwxr-x 1 g g 6878 Nov 15 18:05 missing -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-vti drwxrwxr-x 3 g g 4096 Nov 15 18:05 sub lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex -rw-rw-r-- 1 g g 97 Nov 15 18:05 version.texi doc: total 32 -rw-rw-r-- 1 g g 14745 Nov 15 18:05 bar.pdf drwxrwxr-x 3 g g 4096 Nov 15 18:05 bar.t2p -rw-rw-r-- 1 g g 102 Nov 15 18:05 bar.texi -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-1 -rw-rw-r-- 1 g g 97 Nov 15 18:05 version2.texi sub: total 76 -rw-rw-r-- 1 g g 14745 Nov 15 18:05 baz.pdf drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2p -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 76 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex + case $fmt in + test -f foo.pdf + test -f doc/bar.pdf + test -f baz.pdf + test -f sub/baz.pdf + ls -d foo.pdf foo.t2p foo.texi baz.pdf baz.t2p baz.texi sub/baz.pdf sub/baz.t2p sub/baz.texi doc/bar.pdf doc/bar.t2p doc/bar.texi + basename_rx='(foo|doc/bar|baz|sub/baz)' + case $fmt in + extension_rx='(texi|pdf|t2p)' + /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|pdf|t2p)$' lst + case $fmt in + make -j5 clean Making clean in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' test -z "baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf baz.dvi baz.pdf baz.ps baz.html rm -rf baz.t2d baz.t2p make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html rm -f 1.tmp* ./doc/version2.texi.tmp* rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p rm -f vti.tmp* ./version.texi.tmp* make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + for fmt in info pdf ps dvi html all + make -j5 ps Making ps in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=baz.t2d -o baz.dvi \ baz.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. TEXINPUTS=".:$TEXINPUTS" \ dvips -o baz.ps baz.dvi This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> baz.ps </usr/share/texlive/texmf-dist/dvips/base/tex.pro> </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=foo.t2d -o foo.dvi \ foo.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I doc -I ./doc' \ texi2dvi --build-dir=doc/bar.t2d -o doc/bar.dvi \ `test -f 'doc/bar.texi' || echo './'`doc/bar.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=baz.t2d -o baz.dvi \ baz.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././foo.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi) [1] ) Output written on foo.dvi (1 page, 256 bytes). Transcript written on foo.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc,entering extended mode (../../../../.././doc/bar.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: environments, defuns, pdf, macros, fonts, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, formatting, and turning on texinfo input format. toc, environments,) defuns, macros, Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. TEXINPUTS=".:$TEXINPUTS" \ dvips -o foo.ps foo.dvi cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi) [1] ) Output written on bar.dvi (1 page, 256 bytes). Transcript written on bar.log. This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> foo.ps </usr/share/texlive/texmf-dist/dvips/base/tex.pro> </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] TEXINPUTS=".:$TEXINPUTS" \ dvips -o doc/bar.ps doc/bar.dvi This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> doc/bar.ps </usr/share/texlive/texmf-dist/dvips/base/tex.pro> </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. TEXINPUTS=".:$TEXINPUTS" \ dvips -o baz.ps baz.dvi This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> baz.ps </usr/share/texlive/texmf-dist/dvips/base/tex.pro> </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + ls -l . doc sub .: total 420 -rw-rw-r-- 1 g g 27212 Nov 15 18:05 aclocal.m4 drwxr-xr-x 2 g g 4096 Nov 15 18:05 autom4te.cache -rw-rw-r-- 1 g g 256 Nov 15 18:05 baz.dvi -rw-rw-r-- 1 g g 27813 Nov 15 18:05 baz.ps drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2d -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rwxrwxr-x 1 g g 7400 Nov 15 18:05 compile -rw-rw-r-- 1 g g 5411 Nov 15 18:05 config.log -rwxrwxr-x 1 g g 25438 Nov 15 18:05 config.status -rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure -rw-rw-r-- 1 g g 123 Nov 15 18:05 configure.ac -rwxrwxr-x 1 g g 23568 Nov 15 18:05 depcomp drwxrwxr-x 3 g g 4096 Nov 15 18:05 doc -rw-rw-r-- 1 g g 256 Nov 15 18:05 foo.dvi -rw-rw-r-- 1 g g 27813 Nov 15 18:05 foo.ps drwxrwxr-x 3 g g 4096 Nov 15 18:05 foo.t2d -rw-rw-r-- 1 g g 101 Nov 15 18:05 foo.texi -rwxrwxr-x 1 g g 15358 Nov 15 18:05 install-sh -rw-rw-r-- 1 g g 124 Nov 15 18:05 lst -rw-rw-r-- 1 g g 41057 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 112 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 40226 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh -rwxrwxr-x 1 g g 6878 Nov 15 18:05 missing -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-vti drwxrwxr-x 3 g g 4096 Nov 15 18:05 sub lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex -rw-rw-r-- 1 g g 97 Nov 15 18:05 version.texi doc: total 48 -rw-rw-r-- 1 g g 256 Nov 15 18:05 bar.dvi -rw-rw-r-- 1 g g 27829 Nov 15 18:05 bar.ps drwxrwxr-x 3 g g 4096 Nov 15 18:05 bar.t2d -rw-rw-r-- 1 g g 102 Nov 15 18:05 bar.texi -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-1 -rw-rw-r-- 1 g g 97 Nov 15 18:05 version2.texi sub: total 92 -rw-rw-r-- 1 g g 256 Nov 15 18:05 baz.dvi -rw-rw-r-- 1 g g 27813 Nov 15 18:05 baz.ps drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2d -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 76 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex + case $fmt in + test -f foo.ps + test -f doc/bar.ps + test -f baz.ps + test -f sub/baz.ps + ls -d foo.dvi foo.ps foo.t2d foo.texi baz.dvi baz.ps baz.t2d baz.texi sub/baz.dvi sub/baz.ps sub/baz.t2d sub/baz.texi doc/bar.dvi doc/bar.ps doc/bar.t2d doc/bar.texi + basename_rx='(foo|doc/bar|baz|sub/baz)' + case $fmt in + extension_rx='(texi|ps|dvi|t2d)' + /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|ps|dvi|t2d)$' lst + case $fmt in + make -j5 clean Making clean in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' test -z "baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf baz.dvi baz.pdf baz.ps baz.html rm -rf baz.t2d baz.t2p make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html rm -f 1.tmp* ./doc/version2.texi.tmp* rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p rm -f vti.tmp* ./version.texi.tmp* make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + for fmt in info pdf ps dvi html all + make -j5 dvi Making dvi in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=baz.t2d -o baz.dvi \ baz.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=foo.t2d -o foo.dvi \ foo.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I doc -I ./doc' \ texi2dvi --build-dir=doc/bar.t2d -o doc/bar.dvi \ `test -f 'doc/bar.texi' || echo './'`doc/bar.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=baz.t2d -o baz.dvi \ baz.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././foo.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. ) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi) [1] ) Output written on foo.dvi (1 page, 256 bytes). Transcript written on foo.log. entering extended mode (../../../../.././doc/bar.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi) [1] ) Output written on bar.dvi (1 page, 256 bytes). Transcript written on bar.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + ls -l . doc sub .: total 364 -rw-rw-r-- 1 g g 27212 Nov 15 18:05 aclocal.m4 drwxr-xr-x 2 g g 4096 Nov 15 18:05 autom4te.cache -rw-rw-r-- 1 g g 256 Nov 15 18:05 baz.dvi drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2d -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rwxrwxr-x 1 g g 7400 Nov 15 18:05 compile -rw-rw-r-- 1 g g 5411 Nov 15 18:05 config.log -rwxrwxr-x 1 g g 25438 Nov 15 18:05 config.status -rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure -rw-rw-r-- 1 g g 123 Nov 15 18:05 configure.ac -rwxrwxr-x 1 g g 23568 Nov 15 18:05 depcomp drwxrwxr-x 3 g g 4096 Nov 15 18:05 doc -rw-rw-r-- 1 g g 256 Nov 15 18:05 foo.dvi drwxrwxr-x 3 g g 4096 Nov 15 18:05 foo.t2d -rw-rw-r-- 1 g g 101 Nov 15 18:05 foo.texi -rwxrwxr-x 1 g g 15358 Nov 15 18:05 install-sh -rw-rw-r-- 1 g g 160 Nov 15 18:05 lst -rw-rw-r-- 1 g g 41057 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 112 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 40226 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh -rwxrwxr-x 1 g g 6878 Nov 15 18:05 missing -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-vti drwxrwxr-x 3 g g 4096 Nov 15 18:05 sub lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex -rw-rw-r-- 1 g g 97 Nov 15 18:05 version.texi doc: total 20 -rw-rw-r-- 1 g g 256 Nov 15 18:05 bar.dvi drwxrwxr-x 3 g g 4096 Nov 15 18:05 bar.t2d -rw-rw-r-- 1 g g 102 Nov 15 18:05 bar.texi -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-1 -rw-rw-r-- 1 g g 97 Nov 15 18:05 version2.texi sub: total 64 -rw-rw-r-- 1 g g 256 Nov 15 18:05 baz.dvi drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2d -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 76 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex + case $fmt in + test -f foo.dvi + test -f doc/bar.dvi + test -f baz.dvi + test -f sub/baz.dvi + ls -d foo.dvi foo.t2d foo.texi baz.dvi baz.t2d baz.texi sub/baz.dvi sub/baz.t2d sub/baz.texi doc/bar.dvi doc/bar.t2d doc/bar.texi + basename_rx='(foo|doc/bar|baz|sub/baz)' + case $fmt in + extension_rx='(texi|dvi|t2d)' + /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|dvi|t2d)$' lst + case $fmt in + make -j5 clean Making clean in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' test -z "baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf baz.dvi baz.pdf baz.ps baz.html rm -rf baz.t2d baz.t2p make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html rm -f 1.tmp* ./doc/version2.texi.tmp* rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p rm -f vti.tmp* ./version.texi.tmp* make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + for fmt in info pdf ps dvi html all + make -j5 html Making html in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' rm -rf baz.htp if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html -I . \ -o baz.htp baz.texi; \ then \ rm -rf baz.html && mv baz.htp baz.html; \ else \ rm -rf baz.htp; exit 1; \ fi make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' rm -rf foo.htp rm -rf doc/bar.htp rm -rf baz.htp if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html -I . \ -o baz.htp baz.texi; \ then \ rm -rf baz.html && mv baz.htp baz.html; \ else \ rm -rf baz.htp; exit 1; \ fi if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html -I doc -I ./doc \ -o doc/bar.htp `test -f 'doc/bar.texi' || echo './'`doc/bar.texi; \ then \ rm -rf doc/bar.html && mv doc/bar.htp doc/bar.html; \ else \ rm -rf doc/bar.htp; exit 1; \ fi if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html -I . \ -o foo.htp foo.texi; \ then \ rm -rf foo.html && mv foo.htp foo.html; \ else \ rm -rf foo.htp; exit 1; \ fi make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + ls -l . doc sub .: total 356 -rw-rw-r-- 1 g g 27212 Nov 15 18:05 aclocal.m4 drwxr-xr-x 2 g g 4096 Nov 15 18:05 autom4te.cache drwxr-xr-x 2 g g 4096 Nov 15 18:05 baz.html -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rwxrwxr-x 1 g g 7400 Nov 15 18:05 compile -rw-rw-r-- 1 g g 5411 Nov 15 18:05 config.log -rwxrwxr-x 1 g g 25438 Nov 15 18:05 config.status -rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure -rw-rw-r-- 1 g g 123 Nov 15 18:05 configure.ac -rwxrwxr-x 1 g g 23568 Nov 15 18:05 depcomp drwxrwxr-x 3 g g 4096 Nov 15 18:05 doc drwxr-xr-x 2 g g 4096 Nov 15 18:05 foo.html -rw-rw-r-- 1 g g 101 Nov 15 18:05 foo.texi -rwxrwxr-x 1 g g 15358 Nov 15 18:05 install-sh -rw-rw-r-- 1 g g 124 Nov 15 18:05 lst -rw-rw-r-- 1 g g 41057 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 112 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 40226 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh -rwxrwxr-x 1 g g 6878 Nov 15 18:05 missing -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-vti drwxrwxr-x 3 g g 4096 Nov 15 18:05 sub lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex -rw-rw-r-- 1 g g 97 Nov 15 18:05 version.texi doc: total 16 drwxr-xr-x 2 g g 4096 Nov 15 18:05 bar.html -rw-rw-r-- 1 g g 102 Nov 15 18:05 bar.texi -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-1 -rw-rw-r-- 1 g g 97 Nov 15 18:05 version2.texi sub: total 60 drwxr-xr-x 2 g g 4096 Nov 15 18:05 baz.html -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 76 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex + case $fmt in + test -e foo.html + test -e doc/bar.html + test -e baz.html + test -e sub/baz.html + ls -d foo.html foo.texi baz.html baz.texi sub/baz.html sub/baz.texi doc/bar.html doc/bar.texi + basename_rx='(foo|doc/bar|baz|sub/baz)' + case $fmt in + extension_rx='(texi|html)' + /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|html)$' lst + case $fmt in + make -j5 clean Making clean in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' test -z "baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf baz.dvi baz.pdf baz.ps baz.html rm -rf baz.t2d baz.t2p make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html rm -f 1.tmp* ./doc/version2.texi.tmp* rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p rm -f vti.tmp* ./version.texi.tmp* make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + for fmt in info pdf ps dvi html all + make -j5 all Making all in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \ for f in baz.info baz.info-[0-9] baz.info-[0-9][0-9] baz.i[0-9] baz.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I . \ -o baz.info baz.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./baz.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=baz.t2d -o baz.dvi \ baz.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --pdf --batch --build-dir=baz.t2p -o baz.pdf \ baz.texi rm -rf baz.htp if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html -I . \ -o baz.htp baz.texi; \ then \ rm -rf baz.html && mv baz.htp baz.html; \ else \ rm -rf baz.htp; exit 1; \ fi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing,entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: sectioning, toc, pdf, environments, defuns, fonts, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, formatting, and turning on texinfo input format. toc, environments,) defuns, macros, Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] cross references, ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros,entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: cross references, insertions, pdf, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) fonts, localization, markup, formatting, and turning on texinfo input format. glyphs, page headings,) tables, Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1 conditionals,] indexing, ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. TEXINPUTS=".:$TEXINPUTS" \ dvips -o baz.ps baz.dvi This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> baz.ps </usr/share/texlive/texmf-dist/dvips/base/tex.pro> </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \ for f in foo.info foo.info-[0-9] foo.info-[0-9][0-9] foo.i[0-9] foo.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I . \ -o foo.info foo.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./foo.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \ for f in doc/bar.info doc/bar.info-[0-9] doc/bar.info-[0-9][0-9] doc/bar.i[0-9] doc/bar.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I doc -I ./doc \ -o doc/bar.info ./doc/bar.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./doc/bar.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \ for f in baz.info baz.info-[0-9] baz.info-[0-9][0-9] baz.i[0-9] baz.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I . \ -o baz.info baz.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./baz.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc Making ps in sub make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[2]: Nothing to be done for 'ps'. make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' Making pdf in sub make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=foo.t2d -o foo.dvi \ foo.texi make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[2]: Nothing to be done for 'pdf'. make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --pdf --batch --build-dir=foo.t2p -o foo.pdf \ foo.texi Making dvi in sub make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=foo.t2d -o foo.dvi \ foo.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I doc -I ./doc' \ texi2dvi --build-dir=doc/bar.t2d -o doc/bar.dvi \ `test -f 'doc/bar.texi' || echo './'`doc/bar.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=baz.t2d -o baz.dvi \ baz.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././foo.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi) [1] ) Output written on foo.dvi (1 page, 256 bytes). Transcript written on foo.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././foo.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on foo.pdf (1 page, 14745 bytes). Transcript written on foo.log. TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I doc -I ./doc' \ texi2dvi --build-dir=doc/bar.t2d -o doc/bar.dvi \ `test -f 'doc/bar.texi' || echo './'`doc/bar.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I doc -I ./doc' \ texi2dvi --pdf --batch --build-dir=doc/bar.t2p -o doc/bar.pdf \ `test -f 'doc/bar.texi' || echo './'`doc/bar.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././foo.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings,entering extended mode (../../../../.././doc/bar.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: tables, conditionals, indexing, pdf, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, fonts, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi) [1] ) Output written on foo.dvi (1 page, 256 bytes). Transcript written on foo.log. markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi) [1] ) Output written on bar.dvi (1 page, 256 bytes). Transcript written on bar.log. TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --pdf --batch --build-dir=baz.t2p -o baz.pdf \ baz.texi TEXINPUTS=".:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo -I .' \ texi2dvi --build-dir=baz.t2d -o baz.dvi \ baz.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../../.././doc/bar.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization,This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi) [1] ) Output written on bar.dvi (1 page, 256 bytes). Transcript written on bar.log. entering extended mode (../../../../.././doc/bar.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on bar.pdf (1 page, 14745 bytes). Transcript written on bar.log. Making html in sub make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[2]: Nothing to be done for 'html'. make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' rm -rf foo.htp if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html -I . \ -o foo.htp foo.texi; \ then \ rm -rf foo.html && mv foo.htp foo.html; \ else \ rm -rf foo.htp; exit 1; \ fi rm -rf doc/bar.htp if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html -I doc -I ./doc \ -o doc/bar.htp `test -f 'doc/bar.texi' || echo './'`doc/bar.texi; \ then \ rm -rf doc/bar.html && mv doc/bar.htp doc/bar.html; \ else \ rm -rf doc/bar.htp; exit 1; \ fi TEXINPUTS=".:$TEXINPUTS" \ dvips -o foo.ps foo.dvi This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> foo.ps </usr/share/texlive/texmf-dist/dvips/base/tex.pro> </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] rm -rf baz.htp if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html -I . \ -o baz.htp baz.texi; \ then \ rm -rf baz.html && mv baz.htp baz.html; \ else \ rm -rf baz.htp; exit 1; \ fi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. TEXINPUTS=".:$TEXINPUTS" \ dvips -o doc/bar.ps doc/bar.dvi This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> doc/bar.ps </usr/share/texlive/texmf-dist/dvips/base/tex.pro> </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. TEXINPUTS=".:$TEXINPUTS" \ dvips -o baz.ps baz.dvi entering extended mode (../../../.././baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> baz.ps </usr/share/texlive/texmf-dist/dvips/base/tex.pro> </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. markup, </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] glyphs, page headings,make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + ls -l . doc sub .: total 476 -rw-rw-r-- 1 g g 27212 Nov 15 18:05 aclocal.m4 drwxr-xr-x 2 g g 4096 Nov 15 18:05 autom4te.cache -rw-rw-r-- 1 g g 256 Nov 15 18:05 baz.dvi drwxr-xr-x 2 g g 4096 Nov 15 18:05 baz.html -rw-rw-r-- 1 g g 226 Nov 15 18:05 baz.info -rw-rw-r-- 1 g g 14745 Nov 15 18:05 baz.pdf -rw-rw-r-- 1 g g 27813 Nov 15 18:05 baz.ps drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2d drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2p -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rwxrwxr-x 1 g g 7400 Nov 15 18:05 compile -rw-rw-r-- 1 g g 5411 Nov 15 18:05 config.log -rwxrwxr-x 1 g g 25438 Nov 15 18:05 config.status -rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure -rw-rw-r-- 1 g g 123 Nov 15 18:05 configure.ac -rwxrwxr-x 1 g g 23568 Nov 15 18:05 depcomp drwxrwxr-x 5 g g 4096 Nov 15 18:05 doc -rw-rw-r-- 1 g g 256 Nov 15 18:05 foo.dvi drwxr-xr-x 2 g g 4096 Nov 15 18:05 foo.html -rw-rw-r-- 1 g g 207 Nov 15 18:05 foo.info -rw-rw-r-- 1 g g 14745 Nov 15 18:05 foo.pdf -rw-rw-r-- 1 g g 27813 Nov 15 18:05 foo.ps drwxrwxr-x 3 g g 4096 Nov 15 18:05 foo.t2d drwxrwxr-x 3 g g 4096 Nov 15 18:05 foo.t2p -rw-rw-r-- 1 g g 101 Nov 15 18:05 foo.texi -rwxrwxr-x 1 g g 15358 Nov 15 18:05 install-sh -rw-rw-r-- 1 g g 88 Nov 15 18:05 lst -rw-rw-r-- 1 g g 41057 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 112 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 40226 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh -rwxrwxr-x 1 g g 6878 Nov 15 18:05 missing -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-vti drwxrwxr-x 5 g g 4096 Nov 15 18:05 sub lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex -rw-rw-r-- 1 g g 97 Nov 15 18:05 version.texi doc: total 76 -rw-rw-r-- 1 g g 256 Nov 15 18:05 bar.dvi drwxr-xr-x 2 g g 4096 Nov 15 18:05 bar.html -rw-rw-r-- 1 g g 207 Nov 15 18:05 bar.info -rw-rw-r-- 1 g g 14745 Nov 15 18:05 bar.pdf -rw-rw-r-- 1 g g 27829 Nov 15 18:05 bar.ps drwxrwxr-x 3 g g 4096 Nov 15 18:05 bar.t2d drwxrwxr-x 3 g g 4096 Nov 15 18:05 bar.t2p -rw-rw-r-- 1 g g 102 Nov 15 18:05 bar.texi -rw-rw-r-- 1 g g 97 Nov 15 18:05 stamp-1 -rw-rw-r-- 1 g g 97 Nov 15 18:05 version2.texi sub: total 120 -rw-rw-r-- 1 g g 256 Nov 15 18:05 baz.dvi drwxr-xr-x 2 g g 4096 Nov 15 18:05 baz.html -rw-rw-r-- 1 g g 226 Nov 15 18:05 baz.info -rw-rw-r-- 1 g g 14745 Nov 15 18:05 baz.pdf -rw-rw-r-- 1 g g 27813 Nov 15 18:05 baz.ps drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2d drwxrwxr-x 3 g g 4096 Nov 15 18:05 baz.t2p -rw-rw-r-- 1 g g 197 Nov 15 18:05 baz.texi -rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile -rw-rw-r-- 1 g g 76 Nov 15 18:05 Makefile.am -rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in lrwxrwxrwx 1 g g 49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex + case $fmt in + for x in info pdf ps dvi + test -f foo.info + test -f doc/bar.info + test -f baz.info + test -f sub/baz.info + for x in info pdf ps dvi + test -f foo.pdf + test -f doc/bar.pdf + test -f baz.pdf + test -f sub/baz.pdf + for x in info pdf ps dvi + test -f foo.ps + test -f doc/bar.ps + test -f baz.ps + test -f sub/baz.ps + for x in info pdf ps dvi + test -f foo.dvi + test -f doc/bar.dvi + test -f baz.dvi + test -f sub/baz.dvi + test -e foo.html + test -e doc/bar.html + test -e baz.html + test -e sub/baz.html + ls -d foo.dvi foo.html foo.info foo.pdf foo.ps foo.t2d foo.t2p foo.texi baz.dvi baz.html baz.info baz.pdf baz.ps baz.t2d baz.t2p baz.texi sub/baz.dvi sub/baz.html sub/baz.info sub/baz.pdf sub/baz.ps sub/baz.t2d sub/baz.t2p sub/baz.texi doc/bar.dvi doc/bar.html doc/bar.info doc/bar.pdf doc/bar.ps doc/bar.t2d doc/bar.t2p doc/bar.texi + basename_rx='(foo|doc/bar|baz|sub/baz)' + case $fmt in + extension_rx='(texi|html|info|pdf|ps|dvi|t2[pd])' + /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|html|info|pdf|ps|dvi|t2[pd])$' lst + case $fmt in + make -j5 clean Making clean in sub make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' test -z "baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf baz.dvi baz.pdf baz.ps baz.html rm -rf baz.t2d baz.t2p make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \ || rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \ doc/bar.html baz.dvi baz.pdf baz.ps baz.html rm -f 1.tmp* ./doc/version2.texi.tmp* rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p rm -f vti.tmp* ./version.texi.tmp* make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' + make -j5 distcheck make dist-gzip am__post_remove_distdir='@:' make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' make distdir-am make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' if test -d "txinfo-no-clutter-1.0"; then find "txinfo-no-clutter-1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "txinfo-no-clutter-1.0" || { sleep 5 && rm -rf "txinfo-no-clutter-1.0"; }; else :; fi test -d "txinfo-no-clutter-1.0" || mkdir "txinfo-no-clutter-1.0" (cd sub && make top_distdir=../txinfo-no-clutter-1.0 distdir=../txinfo-no-clutter-1.0/sub \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make distdir-am make[4]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make \ top_distdir="../txinfo-no-clutter-1.0" distdir="../txinfo-no-clutter-1.0/sub" \ dist-info make[5]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[5]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[4]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub' make \ top_distdir="txinfo-no-clutter-1.0" distdir="txinfo-no-clutter-1.0" \ dist-info make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' test -n "" \ || find "txinfo-no-clutter-1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/bash /home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/install-sh -c -m a+r {} {} \; \ || chmod -R a+r "txinfo-no-clutter-1.0" make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' tardir=txinfo-no-clutter-1.0 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >txinfo-no-clutter-1.0.tar.gz make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir' if test -d "txinfo-no-clutter-1.0"; then find "txinfo-no-clutter-1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "txinfo-no-clutter-1.0" || { sleep 5 && rm -rf "txinfo-no-clutter-1.0"; }; else :; fi case 'txinfo-no-clutter-1.0.tar.gz' in \ *.tar.gz*) \ eval GZIP= gzip --best -dc txinfo-no-clutter-1.0.tar.gz | ${TAR-tar} xf - ;;\ *.tar.bz2*) \ bzip2 -dc txinfo-no-clutter-1.0.tar.bz2 | ${TAR-tar} xf - ;;\ *.tar.lz*) \ lzip -dc txinfo-no-clutter-1.0.tar.lz | ${TAR-tar} xf - ;;\ *.tar.xz*) \ xz -dc txinfo-no-clutter-1.0.tar.xz | ${TAR-tar} xf - ;;\ *.tar.Z*) \ uncompress -c txinfo-no-clutter-1.0.tar.Z | ${TAR-tar} xf - ;;\ *.shar.gz*) \ eval GZIP= gzip --best -dc txinfo-no-clutter-1.0.shar.gz | unshar ;;\ *.zip*) \ unzip txinfo-no-clutter-1.0.zip ;;\ *.tar.zst*) \ zstd -dc txinfo-no-clutter-1.0.tar.zst | ${TAR-tar} xf - ;;\ esac chmod -R a-w txinfo-no-clutter-1.0 chmod u+w txinfo-no-clutter-1.0 mkdir txinfo-no-clutter-1.0/_build txinfo-no-clutter-1.0/_build/sub txinfo-no-clutter-1.0/_inst chmod a-w txinfo-no-clutter-1.0 test -d txinfo-no-clutter-1.0/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd txinfo-no-clutter-1.0/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd txinfo-no-clutter-1.0/_build/sub \ && ../../configure \ \ \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf txinfo-no-clutter-1.0.tar.gz \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating sub/Makefile make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' Making all in sub make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' TEXINPUTS="../../../sub:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I ../../../sub' \ texi2dvi --build-dir=baz.t2d -o baz.dvi \ ../../../sub/baz.texi TEXINPUTS="../../../sub:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I ../../../sub' \ texi2dvi --pdf --batch --build-dir=baz.t2p -o baz.pdf \ ../../../sub/baz.texi rm -rf baz.htp if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo --html -I ../../../sub \ -o baz.htp ../../../sub/baz.texi; \ then \ rm -rf baz.html && mv baz.htp baz.html; \ else \ rm -rf baz.htp; exit 1; \ fi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././../../../sub/baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././../../../sub/baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfbThis is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. > Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. entering extended mode (../../../.././../../../sub/baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. TEXINPUTS="../../../sub:$TEXINPUTS" \ dvips -o baz.ps baz.dvi entering extended mode (../../../.././../../../sub/baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments,This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> baz.ps defuns,</usr/share/texlive/texmf-dist/dvips/base/tex.pro> macros, </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' Making html in sub Making ps in sub Making dvi in sub make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' make[3]: Nothing to be done for 'html'. make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' Making pdf in sub make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' make[3]: Nothing to be done for 'ps'. make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' rm -rf foo.htp make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' make[3]: Nothing to be done for 'pdf'. make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub' make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' TEXINPUTS="../..:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I ../..' \ texi2dvi --build-dir=foo.t2d -o foo.dvi \ ../../foo.texi make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' TEXINPUTS="../..:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I ../..' \ texi2dvi --build-dir=foo.t2d -o foo.dvi \ ../../foo.texi if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo --html -I ../.. \ -o foo.htp ../../foo.texi; \ then \ rm -rf foo.html && mv foo.htp foo.html; \ else \ rm -rf foo.htp; exit 1; \ fi rm -rf baz.htp make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' TEXINPUTS="../..:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I ../..' \ texi2dvi --pdf --batch --build-dir=foo.t2p -o foo.pdf \ ../../foo.texi if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo --html -I ../.. \ -o baz.htp ../../baz.texi; \ then \ rm -rf baz.html && mv baz.htp baz.html; \ else \ rm -rf baz.htp; exit 1; \ fi mkdir: cannot create directory ‘foo.t2d/foo.t2d/dvi/bak’: File exists mkdir: cannot create directory ‘foo.t2d/foo.t2d/dvi/check_recorder’: File exists TEXINPUTS="../..:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I doc -I ../../doc' \ texi2dvi --pdf --batch --build-dir=doc/bar.t2p -o doc/bar.pdf \ `test -f 'doc/bar.texi' || echo '../../'`doc/bar.texi rm -rf doc/bar.htp if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo --html -I doc -I ../../doc \ -o doc/bar.htp `test -f 'doc/bar.texi' || echo '../../'`doc/bar.texi; \ then \ rm -rf doc/bar.html && mv doc/bar.htp doc/bar.html; \ else \ rm -rf doc/bar.htp; exit 1; \ fi make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' TEXINPUTS="../..:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I doc -I ../../doc' \ texi2dvi --build-dir=doc/bar.t2d -o doc/bar.dvi \ `test -f 'doc/bar.texi' || echo '../../'`doc/bar.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../.././../../foo.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables,This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization,This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. formatting, and turning on texinfo input format.)entering extended mode (../../../.././../../foo.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../version.texi) [1] ) Output written on foo.dvi (1 page, 256 bytes). Transcript written on foo.log. entering extended mode (../../../.././../../foo.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, markup, cross references, glyphs, page headings, insertions, tables, (/usr/share/texmf/tex/generic/epsf/epsf.tex conditionals, This is `epsf.tex' v2.7.4 <14 February 2011> ) indexing, localization, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../version.texi) [1] ) Output written on foo.dvi (1 page, 256 bytes). Transcript written on foo.log. formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../version.texi) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map} ] )</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on foo.pdf (1 page, 14745 bytes). Transcript written on foo.log. mv: cannot stat 'foo.dvi': No such file or directory Makefile:411: recipe for target 'foo.dvi' failed make[3]: *** [foo.dvi] Error 1 make[3]: *** Waiting for unfinished jobs.... TEXINPUTS="../..:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I ../..' \ texi2dvi --build-dir=baz.t2d -o baz.dvi \ ../../baz.texi TEXINPUTS="../..:$TEXINPUTS" \ dvips -o foo.ps foo.dvi This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) ' TeX output 2020.11.15:1805' -> foo.ps TEXINPUTS="../..:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I ../..' \ texi2dvi --pdf --batch --build-dir=baz.t2p -o baz.pdf \ ../../baz.texi </usr/share/texlive/texmf-dist/dvips/base/tex.pro> </usr/share/texlive/texmf-dist/dvips/base/texps.pro>. </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] TEXINPUTS="../..:$TEXINPUTS" \ MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo -I doc -I ../../doc' \ texi2dvi --build-dir=doc/bar.t2d -o doc/bar.dvi \ `test -f 'doc/bar.texi' || echo '../../'`doc/bar.texi This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../../.././../../doc/bar.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/doc/version2.texi) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</ usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on bar.pdf (1 page, 14745 bytes). Transcript written on bar.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. entering extended mode (../../../../.././../../doc/bar.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros,This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/doc/version2.texi) [1] ) Output written on bar.dvi (1 page, 256 bytes). Transcript written on bar.log. entering extended mode (../../../../.././../../doc/bar.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/doc/version2.texi) [1] ) Output written on bar.dvi (1 page, 256 bytes). Transcript written on bar.log. mv: cannot stat 'bar.dvi': No such file or directory Makefile:482: recipe for target 'doc/bar.dvi' failed make[3]: *** [doc/bar.dvi] Error 1 make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' Makefile:630: recipe for target 'dvi-recursive' failed make[2]: *** [dvi-recursive] Error 1 make[2]: *** Waiting for unfinished jobs.... TEXINPUTS="../..:$TEXINPUTS" \ dvips -o doc/bar.ps doc/bar.dvi This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com) dvips: DVI file can't be opened: doc/bar.dvi: No such file or directory Makefile:528: recipe for target 'doc/bar.ps' failed make[3]: *** [doc/bar.ps] Error 1 make[3]: *** Waiting for unfinished jobs.... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././../../baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,entering extended mode (../../../.././../../baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex markup, This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex) restricted \write18 enabled. This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (../../../.././../../baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,entering extended mode (../../../.././../../baz.texi (/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1. 0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: markup, pdf, glyphs, page headings, fonts, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex This is `epsf.tex' v2.7.4 <14 February 2011> ) localization, markup, glyphs, page headings, tables, conditionals, indexing, sectioning, toc, environments, defuns, macros, cross references, insertions, (/usr/share/texmf/tex/generic/epsf/epsf.tex formatting, This is `epsf.tex' v2.7.4 <14 February 2011> ) and turning on texinfo input format. localization,) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1] ) Output written on baz.dvi (1 page, 256 bytes). Transcript written on baz.log. formatting, and turning on texinfo input format.) Writing index file baz.cp Writing index file baz.pg Writing index file baz.au Writing index file baz.sa Writing index file baz.sb [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb> Output written on baz.pdf (1 page, 14745 bytes). Transcript written on baz.log. make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' Makefile:630: recipe for target 'ps-recursive' failed make[2]: *** [ps-recursive] Error 1 make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' Makefile:630: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub' Makefile:846: recipe for target 'distcheck' failed make: *** [distcheck] Error 1 + am_exit_trap 2 + exit_status=2 + set +e + cd /home/g/src/automake-GIT/automake + test none = tap + case $am_explicit_skips in + test 2 -eq 0 + keep_testdirs=yes + am_keeping_testdirs + case $keep_testdirs in + return 0 + set +x FAIL t/txinfo-no-clutter.sh (exit status: 2)
