Hi, I've played a few last months with babeld and some single radio devices. First of all, i would like to thank you about the quality of this work. Babeld is very stable and fast.
Now, i would like to test the benefit of multi-radio devices, as some USB dongles are laying around me. Before beginning the tests in real life, i would like to know if anyone of you could make it work properly and share its configuration (my thoughts are about the need to use, or to not use, a bridge interface "br0") : - Bridge : What is the recommended configuration refering bridging : should i create a bridge (br0) for wlan0 and wlan1 or not ? - IP Addresses : -> must i assign a unique IP address do each wlan interface (or a unique to br0) -> if i must assign two different IP addresses (one per wlan interface), must i assign an IP address in different or same subnet (192.168.1.0/28 and 192.168.2.0/28 *OR* both in 192.168.1.0/28) ? - Babeld : as i could read in the docs, i should then start babeld with option "wlan0 wlan1" thanks a lot in advance for your help
_______________________________________________ Babel-users mailing list Babel-users@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/babel-users