Based on the patch juliusz supplied me to enable unicast IHU, and default enable-timestamp true
this stops sending timestamps (which apparently relies on hellos and IHUs being bundled together) (aside from that unicast IHU is working fine, am still deploying stuff around the testbed, not evaluating anything yet) I was polling rtts (as measured by babel) in some prior "latency under load" tests. * side notes the "chip" does not support ipv6-subtrees, nor adhoc. It is certainly handy to babel the usb0 interface, but working around systemd (on ubuntu) can be a pain. add neighbour 1cc4970 address fe80::14c7:67ff:fe31:ceac if enp0s16u1 reach ffff rxcost 96 txcost 96 rtt 0.743 rttcost 0 cost 96 add neighbour 1cc4f40 address fe80::16cc:20ff:fee5:64c2 if enp3s0 reach ffff rxcost 96 txcost 256 rtt 1.067 rttcost 0 cost 256 saturating the usb interface only bumps up the measured rtt by < 5ms add interface enp0s16u1 up true ipv6 fe80::3c21:acff:fe2d:82c1 ipv4 172.26.66.10 add neighbour 1cc4970 address fe80::14c7:67ff:fe31:ceac if enp0s16u1 reach ffff rxcost 96 txcost 96 rtt 4.080 rttcost 0 cost 96 -- Dave Täht Let's go make home routers and wifi faster! With better software! http://blog.cerowrt.org _______________________________________________ Babel-users mailing list Babel-users@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/babel-users