Hello,
wt., 25 cze 2024 o 14:26 Stefan G. Weichinger <[email protected]> napisał(a):
> Am 25.06.24 um 12:59 schrieb Stefan G. Weichinger:
>
> > my director conf is 863 lines long, I assume I should pick out the
> > relevant parts. Will try to.
>
> ok, showing config
>
What about job logs where Bacula "creates a new volume
like "Vol-252", but with MediaType "LTO-6", which is then NOT FOUND in
the tape autoloader. Sure, this one doesn't exist. "Vol-" volumes are
for storage "File" only."?
Device {
> Name = "FileStorage"
> MediaType = "File"
> ArchiveDevice = "/mnt/backup/bacula"
> RemovableMedia = no
> RandomAccess = yes
> AutomaticMount = yes
> LabelMedia = yes
> AlwaysOpen = no
> SpoolDirectory = "/mnt/amhold/bacula"
> MaximumSpoolSize = 80000000000
> }
>
I think you should read best practices document:
https://bacula.org/whitepapers/CommunityDiskBackup.pdf
Especially the part "2.2 Using a Virtual Autochanger"
Device {
> Name = "HP-Ultrium"
> MediaType = "LTO-6"
> ArchiveDevice = "/dev/nst0"
>
You should use persistent device names above.
> RemovableMedia = yes
> RandomAccess = no
> LabelMedia = yes
> AlwaysOpen = yes
> Autochanger = yes
> MaximumBlockSize = 262144
> MaximumFileSize = 8589934592
> SpoolDirectory = "/mnt/amhold/bacula"
> MaximumSpoolSize = 1000000000000
> }
> Messages {
> Name = "Standard"
> Director = samba-dir = All, !Mount
> }
> Autochanger {
> Name = "HP-Autoloader"
> Description = "HP 1x8 G2 AUTOLDR"
> Device = "HP-Ultrium"
> ChangerDevice = "/dev/sg8"
>
The same here about persistent device names.
> ChangerCommand = "/opt/bacula/scripts/mtx-changer %c %o %S %a %d"
> }
>
>
best regards
--
Radosław Korzeniewski
[email protected]
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
