I don’t think it’s a bacula problem, looks like a hardware failure from the auto loader
Code 70 = “release magazine failure” Sent from my iPhone > On May 7, 2024, at 11:05 AM, Stefan G. Weichinger <li...@xunil.at> wrote: > > > more info: > > restarted daemons > > entered bconsole > > mounted a slot, labelled the tape > > Catalog record for Volume "CMR921", Slot 4 successfully created. > Requesting to mount HP-Autoloader ... > 3001 Device ""HP-Ultrium" (/dev/nst0)" is mounted with Volume "CMR921" > > started a (test) job to backup the catalog > > Device status: > Autochanger "HP-Autoloader" with devices: > "HP-Ultrium" (/dev/nst0) > > Device Tape: "HP-Ultrium" (/dev/nst0) open but no Bacula volume is currently > mounted. > Total Bytes Read=0 Blocks Read=0 Bytes/block=0 > Positioned at File=0 Block=0 > Device is being initialized. > Slot 4 is loaded in drive 0. > == > ==== > > Used Volume status: > Reserved volume: CMR921 on Tape device "HP-Ultrium" (/dev/nst0) > Reader=0 writers=0 reserves=1 volinuse=1 worm=0 > > WHY? > > -- > > "07-Mai 16:59 samba-dir JobId 846: Connected to Client "samba-fd" at > samba:9102 with TLS > 07-Mai 16:59 samba-fd JobId 846: Connected to Storage at samba:9103 with TLS > 07-Mai 17:02 samba-sd JobId 846: Error: [SE0203] The Volume=CMR921 on > device="HP-Ultrium" (/dev/nst0) appears to be unlabeled." > > -- > > Could it be related to something like blocksizes? > > These tapes were used with Amanda before. > > trying another tape now > > > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
