On Wed, Sep 2, 2009 at 11:57 PM, Brian J. Mc Hugh<bjmch...@aya.yale.edu> wrote: > Hi Gábor and Broadcom, > > In essense, my card seems to be receiving signal but transmitting none. > > I was appreciate your help, > > Thanks, > Brian > > > Here are the diagnostics; > > #uname -r > 2.6.26-2-686 > > #dmesg | grep b43 > [ 30.415512] b43-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) > [ 32.618331] b43-phy0: Broadcom 4318 WLAN found > [ 40.118466] input: b43-phy0 as /class/input/input6 > [ 40.204186] firmware: requesting b43/ucode5.fw > [ 40.493492] firmware: requesting b43/pcm5.fw > [ 40.677031] firmware: requesting b43/b0g0initvals5.fw > [ 40.763606] firmware: requesting b43/b0g0bsinitvals5.fw > [ 41.036083] b43-phy0: Loading firmware version 410.2160 (2007-05-26 > 15:32:10) > [ 42.308852] Registered led device: b43-phy0::tx > [ 42.308934] Registered led device: b43-phy0::rx > [ 42.309022] Registered led device: b43-phy0::radio > > #lspci -vnn | grep 14e4 > 02:00.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce > One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02) > > #lspci -nnv | grep -A1 14e4 > 02:00.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce > One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02) > Subsystem: Linksys WPC54G-EU version 3 [Wireless-G Notebook Adapter] > [1737:0048] > > #iwlist wlan0 scan > wlan0 Scan completed : > Cell 01 - Address: 00:17:9A:52:34:2D > ESSID:"dlink" > Mode:Master > Channel:11 > Frequency:2.462 GHz (Channel 11) > Quality=73/100 Signal level=-42 dBm Noise level=-63 > dBm > Encryption key:off > Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s > 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s > 48 Mb/s; 54 Mb/s > Extra:tsf=00000017b3fcb180 > > #ifdown wlan0 > There is already a pid file /var/run/dhclient.wlan0.pid with pid 1949 > killed old client process, removed PID file > Internet Systems Consortium DHCP Client V3.1.1 > Copyright 2004-2008 Internet Systems Consortium. > All rights reserved. > For info, please visit http://www.isc.org/sw/dhcp/ > > wmaster0: unknown hardware address type 801 > wmaster0: unknown hardware address type 801 > Listening on LPF/wlan0/00:18:f8:e2:1c:71 > Sending on LPF/wlan0/00:18:f8:e2:1c:71 > Sending on Socket/fallback > > #ifup wlan0 > Internet Systems Consortium DHCP Client V3.1.1 > Copyright 2004-2008 Internet Systems Consortium. > All rights reserved. > For info, please visit http://www.isc.org/sw/dhcp/ > > wmaster0: unknown hardware address type 801 > wmaster0: unknown hardware address type 801 > Listening on LPF/wlan0/00:18:f8:e2:1c:71 > Sending on LPF/wlan0/00:18:f8:e2:1c:71 > Sending on Socket/fallback > DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5 > DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 > DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 14 > DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17 > DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 18 > No DHCPOFFERS received. > No working leases in persistent database - sleeping. > > >
What's visible in dmesg after dhclient? Also, to rule out hardware failures - does the card work under Windows? (4318s break rather easily.) -- Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-) _______________________________________________ Bcm43xx-dev mailing list Bcm43xx-dev@lists.berlios.de https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
