On Tue, February 23, 2010 8:38 pm, Hauke Mehrtens wrote: > Yan Seiner wrote: >> On Tue, February 23, 2010 4:57 pm, Larry Finger wrote: >>> What I do know is that the BCM4318 does work with WPA/WPA2, although my >>> device >>> is Cardbus format in an old laptop. Using Broadcom's proprietary >>> firmware, >>> as >>> you seem to be doing, the encryption/decryption is done in the >>> hardware. >> >> The issues seems to be with the version of wireless utils in the latest >> openwrt snapshot. Sure looked like a driver issue,though. >> >>> I'm a little confused on your usage of the device. As an AP, I see no >>> need >>> to >>> scan. Are you using it as a station, or as a wireless bridge? In these >>> modes, >>> would not the bridging code to eth0 get in the way? >> >> I am using it in STA mode. >> >> I set up a separate network for the wireless and do not use bridging. I >> have to "wan" ports in effect - one for the wireless and one for wired. >> I >> don't use the wired port. >> >> It works quite well (or did, until I tried the b43 drivers at which >> point >> I also got the broken version of iwconfig/iwlist.) >> >> --Yan >> > Hi, > > Someone reports that the station mode is not working for him in OpenWRT > with ath9k driver after the last update of compat-wireless in OpenWRT. > It was reported in https://dev.openwrt.org/ticket/6712 probably this is > not an issue in the ath9k/b43 driver but in some other part of OpenWRT. > > Please try if it helps using an older version of compat-wireless or > using an older version of the hostapd/wpa-supplicant combination. (Just > go back some revisions in the svn for that directories)
Yes, that is the conclusion I came to. I opened a ticket earlier today. https://dev.openwrt.org/ticket/6732 I'll attach it to the other ticket. -- If you have eight hours to chop down a tree spend six sharpening your axe. --Abraham Lincoln _______________________________________________ Bcm43xx-dev mailing list Bcm43xx-dev@lists.berlios.de https://lists.berlios.de/mailman/listinfo/bcm43xx-dev